Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MICHAEL ADAY

Discrimination inspection · Safety discipline

On , OSHA opened a discrimination safety inspection of MICHAEL ADAY in 13075 SR-157, SUITE 6, MOULTON, AL 35650 (NAICS 238160). OSHA activity number 348938788.

Watch Michael Aday — free Get an email when a new federal OSHA severe-injury report for Michael Aday is published. One employer, no account, unsubscribe in one click.
Establishment
MICHAEL ADAY
Site address
13075 SR-157, SUITE 6
City
MOULTON
State
AL
ZIP
35650
Mailing
1300 C. LOWERY ROAD, LEIGHTON, AL 35646
Inspection type
Discrimination (N)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238160
Employees
8
Ownership type
A

5 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2837 · Current $1135 Reduced
29 CFR  1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  (a) On or about May 14, 2026, 13075 SR-157, Suite 6, Moulton, AL; employees working on the ground level were not provided protective helmets/hard hats.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1134.8
  • — Z (S) $2837

1926.102 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3547 · Current $1419 Reduced
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying objects while using a nail gun.   (a) On or about May 14, 2026, 13075 SR-157, Suite 6, Moulton, AL: eye protection was not used by employees operating nail guns.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1418.8
  • — Z (S) $3547

1926.501 B10

Serious Gravity 10 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $4965 · Current $1986 Reduced
29 CFR  1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.    (a) On or about May 14, 2026, 13075 SR-157, Suite 6, Moulton, AL:  employees were performing roofing activities without the use of required fall protection systems at heights between 8-20 feet from the lower level.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $1986
  • — Z (S) $4965

1926.503 A01

Serious Gravity 10 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $4965 · Current $1986 Reduced
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  (a) On or about May 14, 2026, 13075 SR-157, Suite 6, Moulton, AL: employees engaged in framing activities had not received the required training on fall protection hazards and the proper use of fall protection systems.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE action worksheet), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $1986
  • — Z (S) $4965

1926.1053 B01

Serious Gravity 5 1 instance 8 exposed
Issued
Penalty
Initial $4256 · Current $1702 Reduced
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  (a) On or about May 14, 2026, 13075 SR-157, Suite 6, Moulton, AL:  the employer allowed employees to use an extension ladder to gain access to the roof and the rails of the ladder did not extend three feet above the roof landing, nor was it secured, to provide safe access to the work area.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1702.4
  • — Z (S) $4256

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348938788.