OSHA Inspection: MASTER FRAMING CONSTRUCTION INC.

Issued

2026-06-03

Penalty

Initial $2128 · Current $1277 Reduced

General-duty citation text

29 CFR  1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles.  a) On or about May 20, 2026, at the jobsite: employees were exposed to eye injury hazards while using a nail gun and skill saws for framing, in that, eye protection was not used.

Issued

2026-06-03

Penalty

Initial $2128 · Current $1277 Reduced

General-duty citation text

29 CFR  1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b).  a) On or about May 20, 2026, at the jobsite: employees were exposed to a 20' fall hazard while framing on  5:12 sloped roof, in that, fall protection was not used.  b) On or about May 20, 2026, at the jobsite: employees were exposed to a 12' fall hazard while framing on  5:12 sloped roof, in that, fall protection was not used.

Issued

2026-06-03

Penalty

Initial $2128 · Current $1277 Reduced

General-duty citation text

29 CFR  1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:   a) On or about May 20, 2026, at the jobsite: the rails of the Gorilla Ladder Model GLMPXA-18-2 were extended approximately, 1' passed the roof landing, exposing employees to a 12' fall hazard.

Issued

2026-06-03

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1926.1053(b)(6): Unsecured ladder(s) were used on surfaces that were not stable and level:  a) On or about May 20, 2026, at the jobsite: the Gorilla Ladder Model GLMPXA-18-2 was not secured and on a stable surface, exposing employees to a 12' fall hazard.

Issued

2026-06-03

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer.  a) On or about May 20, 2026, at the jobsite: the employer did not provide written fall protection training certificates for employees exposed to an approximate 12'-20 ' fall hazards  while conducting framing operations on a 5:12 sloped roof.