NAICS423510Event Struck by rolling, sliding, or shifting objects non-runningSource Beams and rails metal
A load of steel angles was being lowered when the lifting chain hit the load, causing it to slide toward an employee. An angle slid and pinched the employee, catching both of their legs between the beams and an angle. The employee suffered two fractured legs.
NAICS423930Event Nonroadway noncollision fall or jump from moving vehicleSource Trucks unspecified
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
NAICS424410Event Nonroadway collision with other vehicle(s) moving and standing vehicleSource Forklift, order picker, platform truck powered
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
NAICS423690Event Other fall to lower level unspecifiedSource Trucks unspecified
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.
NAICS424510Event Other fall to lower level 6 to 30 feetSource Forklift, order picker, platform truck powered
An employee was preparing to unjam an auger shaft while standing on a forklift-elevated, job-made platform. The employee's wrench slipped off the equipment, causing them to lose their balance and fall. The employee landed on the ground 14 feet below and suffered fractures to the orbital bone, left elbow, and lower back.
NAICS423930Event Struck by running powered equipment during maintenance, cleaning, testingSource Cleaning machinery, appliances n.e.c.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
Amputations, avulsions, enucleations unspecified Finger or thumb tip(s), nail(s)HospitalizedAmputation
NAICS423720Event Fall to lower level caught self or curtailedSource Portable ladders and stairs unspecified
An employee lost his footing while climbing an inclined ladder. He stumbled down one step and was able to stabilize himself by holding the railing and twisting his body, but he suffered an internal abdominal injury and was hospitalized.
NAICS424490Event Caught, entangled in running powered equipment normal operationSource Food and beverage processing machinery n.e.c.
An employee was cleaning a depositor machine to setup for a new product run. His right index finger was caught by moving parts in the depositor machine and the fingertip was partially amputated without bone loss.
Avulsions, enucleations without bone loss Finger or thumb tip(s), nail(s)Amputation
NAICS424930Event Nonroadway collision with other vehicle(s) moving and standing vehicleSource Pallet jack riding
An employee was operating an electric pallet jack when it struck two parked forklifts. The impact caused the employee to be ejected from the pallet jack, and his right foot became trapped between the forklifts, resulting in a severe laceration to the foot.
Cuts, lacerations, punctures without injury to internal structures Foot (feet), toe(s) unspecifiedHospitalized
NAICS424510Event Struck by falling object unspecifiedSource Ramps, inclines
An employee was walking past a crossover conveyor when a ramp came down and hit them in the back. The employee sustained a broken back vertebra, as well as a concussion, and was hospitalized.
Injuries to the brain, spinal cord and severe wounds, internal injuries Head and trunkHospitalized
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.
Effects of poison, toxic, or allergenic exposure unspecified BODY SYSTEMS Hospitalized
NAICS423210Event Collision with stationary object, nonroadwaySource Forklift, order picker, platform truck powered
An employee was operating a stand-up forklift. The forklift drove into a rack in a warehouse, and the employee's right hand was caught between the rack and an upright supporting the forklift's overhead guard. The employee suffered a fracture and laceration to the hand, just below the little finger.
Fractures and surface, flesh wounds Hand(s), except finger(s)Hospitalized
NAICS424430Event Overexertion while materials moving by handSource Boxes, crates, cartons
An employee was lifting a crate of dairy product and felt severe back pain. The employee was hospitalized with a burst blood vessel in their lower back.
Soft tissue injuries n.e.c. Back lumbar regionHospitalized
NAICS423330Event Running, without other incidentSource Bodily motion or position of injured, ill worker
Employees were at the trucks to leave for lunch. The injured employee was putting the cone back after the crew leader pulled the truck forward from the designated worker parking area. The injured employee then ran back to the truck. As he went to get in the truck, he said the upper thigh area of his leg was hurting. He laid on the ground outside the truck and crew leader could see a bump/bulge in the the injured employee's upper thigh area below his hip. The employee sustained a fractured femur and required surgery.
NAICS424720Event Struck by other falling object n.e.c.Source Source, secondary source unspecified
A forklift lifting device was being picked up with a forklift. The forks were lowered, causing the equipment to fall and injure an employee. The employee sustained cervical spine, facial, and jaw injuries and was hospitalized.
Spinal cord injuries, paralysis unspecified Exterior and musculoskeletal structures of the neckHospitalized
NAICS424470Event Caught, entangled in running powered equipment normal operationSource Grinders, abraders
An employee was grinding meat in a meat grinder when the auger caught his nitrile glove and pulled his arm into the machine. The employee sustained amputation of their left hand and arm to halfway up the forearm and required surgery. The machine was not guarded at the time of the incident.
Amputations involving bone loss Forearm(s)HospitalizedAmputation
NAICS424710Event Fall on same level resulting in exposure or contact Source Vehicle and machine platforms, surfaces
An employee had been unloading tires from the back of a pickup truck. The employee went to step down out of the back of the pickup truck and stepped on the lift gate in a vertical position. The lift gate tipped and employee fell, impacting their side on the upright liftgate. The employee sustained five fractured ribs and a punctured right lung. The employee was hospitalized.
NAICS423140Event Explosion of pressure vessel, piping, or tireSource Tires, inner tubes
An employee was conducting torching operations using oxygen and propane to cut metal beams within the recycling laydown area. The employee used a hose with an air chuck connection to fill up the yard pickup truck's back tire with oxygen. The tire blew up which caused the oxygen to ignite. The employee sustained fractures, internal injuries, burns, and lacerations.
Severe wounds, internal injuries and burns Part of body unspecifiedHospitalized
NAICS423310Event Other fall to lower level less than 6 feetSource Straight trucks, box trucks
An employee was walking down the off ramp from a box truck, carrying a door for delivery. A strong wind caught the door, causing the employee to lose balance and fall about 2 to 3 feet to the ground. He landed on his back and suffered a broken vertebra.
Fractures Exterior and musculoskeletal structures of the back unspecifiedHospitalized
NAICS424420Event Nonroadway collision with other vehicle(s) moving and standing vehicleSource Forklift, order picker, platform truck powered
On October 16, 2025, an employee operating an order selector was passing a moving scrubber when the scrubber suddenly stopped. The order selector struck the back of the scrubber, resulting in a cut to the employee's left ankle.
Cuts, lacerations, punctures without injury to internal structures Ankle(s)Hospitalized
NAICS425120Event Struck by rolling powered vehicle or machinerySource Automobile
An employee was was exiting a car they were detailing when a malfunction caused it to move. The employee was pinned between the car door and a pole, suffering a lower left leg fracture and crushing injuries.