NAICS811310Event Fall to lower level from collapsing structure or equipment 6 to 30 feetSource Portable ladders and stairs unspecified
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
NAICS327390Event Struck by suspended or swinging objects n.e.c.Source Structural blocks stone and masonry
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
Traumatic injuries or exposures unspecified Foot(feet) and leg(s) n.e.c.Hospitalized
NAICS722513Event Contact with hot objects or substancesSource Fats, oils, cooking greases
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
NAICS111150Event Struck by running powered equipment during maintenance, cleaning, testingSource Conveyors screw, auger
An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.
Fractures and surface, flesh wounds Multiple leg locations n.e.c.Hospitalized
NAICS311615Event Struck by running powered equipment during maintenance, cleaning, testingSource Butchering machinery
An employee was troubleshooting a thigh deboner on a poultry processing line. As he worked to dislodge a thigh bone caught in the blade mechanism, the machine amputated the first and second digits on his left hand. He was hospitalized.
Amputations involving bone loss Other finger(s) n.e.c.HospitalizedAmputation
NAICS423140Event Explosion of pressure vessel, piping, or tireSource Tires, inner tubes
An employee was conducting torching operations using oxygen and propane to cut metal beams within the recycling laydown area. The employee used a hose with an air chuck connection to fill up the yard pickup truck's back tire with oxygen. The tire blew up which caused the oxygen to ignite. The employee sustained fractures, internal injuries, burns, and lacerations.
Severe wounds, internal injuries and burns Part of body unspecifiedHospitalized
NAICS622110Event Indirect exposure to electricity greater than 220 voltsSource Lightning
An employee was cleaning a laptop charging cable when lightning struck. The employee began experiencing heart palpitations and hearing loss, resulting in hospitalization.
Electrocution, electric shock BODY SYSTEMS Hospitalized
An employee was on horseback in a pasture checking on the health of calves. The employee roped a calf when their right-hand fingers got caught in the rope, resulting in amputations of three fingers at the top knuckles that required hospitalization.
Amputations involving bone loss Other finger(s) n.e.c.HospitalizedAmputation
NAICS311611Event Caught, entangled in running powered equipment normal operationSource Banding, baling, strapping machinery
An employee was using a box strapping machine to place straps on boxes when his right middle finger was caught in the machine, resulting in an open fracture to the distal phalanx.
NAICS445110Event Fall on same level due to slip or tripSource Other constructed surface
An employee was stocking products on a shelf when she tripped on a metal buffer pole (that protects the cooler from carts/pallets) and fell to the ground. She was transported to the hospital to treat a fractured hip.
NAICS332313Event Struck by other falling object n.e.c.Source Pipes, tubes metal
A steel tube fell from a straddle truck onto an employee's foot, causing the steel toe of the employee's shoe to press into the employee's left foot. The employee sustained fractured phalanges and was hospitalized.
NAICS311611Event Struck by running powered equipment during maintenance, cleaning, testingSource Conveyors unspecified
An employee was cleaning equipment. The employee came into contact with a sprocket on a conveyor, which deeply lacerated the employee's upper right arm.
Cuts, lacerations, punctures without injury to internal structures Upper arm(s)Hospitalized
NAICS444190Event Struck by running powered equipment n.e.c.Source Stationary saws table
An employee was building wood detail blocking and a wood member needed to be resized. The employee took the wood member to the table saw and set the fence to the correct size. The employee pressed down on the board to control it when his left little finger contacted the running blade, resulting in an amputation.
Amputations, avulsions, enucleations unspecified Other finger(s) n.e.c.Amputation
NAICS444220Event Nonroadway noncollision fall or jump from and struck by moving vehicleSource Lawn mower riding
An employee was operating a lawn mower. He fell off while making a turn and the mower ran over his right foot. The employee sustained a laceration on his right ankle.
Cuts, lacerations, punctures without injury to internal structures Ankle(s)Hospitalized
NAICS712130Event Injured by object held or wielded by personSource Knives
An employee was cutting the end from a bunch of celery with a kitchen knife while holding the celery with their other hand. The blade contacted the tip of their left thumb, resulting in a fingertip amputation including the loss of soft tissue.
Amputations involving bone loss Finger or thumb tip(s), nail(s)Amputation
NAICS621491Event Fall while sittingSource Chairs, single-person seating
A doctor was sitting on a rolling stool when it moved out from under him. He fell, landed on his left hip, and suffered a broken left femur. He was hospitalized, requiring surgery.
NAICS311313Event Contact with hot objects or substancesSource Liquid foods and beverages
An employee was helping change out socks on hard thin juice filters, part of a beet sugar manufacturing operation. While the filter lid was being removed, juice started leaking down the side of the filter. This suggested that the juice was bypassing the seat on the main shutoff valve. While the main shutoff was being checked, the valve was opened and sprayed hot juice on the employee. The employee suffered burns to the left arm, the left ribcage area, the left side of the back, and the left side of the face. The employee was hospitalized.
Thermal burns degree unspecified Multiple body parts n.e.c.Hospitalized
NAICS332312Event Struck by other falling object n.e.c.Source Beams and rails metal
An employee was welding on a 4-foot by 5-foot U-shaped steel plate positioned on saw horses. When he went to move the plate to continue work, it slipped from the saw horses and struck him in the lower right leg, fracturing it. He was hospitalized and required surgery.
NAICS336510Event Struck by running powered equipment n.e.c.Source Wrenches, ratchets
An employee was using a handheld cordless electric torque wrench. The tool's reaction arm came into contact with the employee's left hand, causing an amputation to the middle finger above the first knuckle.
Amputations, avulsions, enucleations unspecified Other finger(s) n.e.c.Amputation
NAICS334418Event Fall on same level n.e.c.Source Other constructed surface
On August 26, 2025, an employee was moving a loaded pallet with a pallet jack. She pulled on the pallet jack to get it unstuck from the pallet. When the pallet jack came loose, she lost her balance and fell on the concrete floor by the loading dock door. She landed on her right hip and it was fractured in three places. She was hospitalized and required surgery.
NAICS236115Event Other fall to lower level unspecifiedSource Step ladders
An employee was working from an A-frame ladder, installing a gutter on a one-story home. The employee fell to the ground and suffered injuries to their L10 and L11 vertebrae. The employee was hospitalized.
Traumatic injuries or exposures unspecified Back lumbar regionHospitalized