Search workplace incidents

An employee tripped over a concrete curb stop in a parking lot. The employee fell to the ground, landing on their left hip and breaking it.

An employee was climbing down a ladder when it slipped. The employee fell, suffering a broken scapula and broken ribs. The employee was hospitalized.

An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.

An employee was climbing down a 15-foot multipurpose ladder. The employee fell about 8 feet, landing on the concrete floor and the ladder itself. The employee suffered several injuries, all on the right side: broken ribs, a broken sternum, a broken temporal bone, broken shoulder, multiple fractures to the cheekbone, and a brain bleed.

An employee was rolling up the landing gear on his trailer when the handle began to unwind and struck his face, fracturing his jaw. The employee was hospitalized and required surgery.

An employee was pressure washing truck scales when they were splashed with water and an unknown chemical on their leg and immediately experienced a burning sensation. The employee was hospitalized with a chemical burn and required surgery.

Employees were moving a paving machine. The machine had been pulled forward, then put in reverse to back up a hill, when it revved up and went out of control. It had moved about 40 feet when one employee jumped out of it and was dragged under it. A second employee rode about another 40 feet, then jumped out to avoid a steep embankment. The first employee suffered a broken pelvis, and the second employee suffered a broken lower leg. Both were hospitalized.

An employee was standing at the rear of a machine and the machine's mesh tray fell down onto the rear of the machine, crushing his left hand against the read lift. The employee sustained fractures and a laceration to their left hand and was hospitalized.

An employee was on a ladder hanging drywall. He fell from the ladder's fourth rung, striking the ladder itself as well as the carpeted floor. He suffered five or six broken ribs, a bruised lung, and pain in the left wrist, neck, and back. He was hospitalized.

An employee was observing a spool that was pulling tracer wire in order to ensure the wire stayed on track. A strand on the wire disconnected and struck the employee's face, resulting in an avulsion to the scalp and forehead, a concussion, a laceration on the right eyelid, and abrasions around the neck.

An employee was walking across a sales floor. The employee and a customer collided at a corner; the employee fell and broke their right kneecap on the floor. The employee was hospitalized, requiring surgery.

An employee was using a sleever bar to move a checker plate into place and secure it to the floor of a structure in the melt shop. The sleever bar became stuck and the employee used his left hand to lift the checker plate up enough to free the sleever bar. Once the bar was freed, the checker plate came down and pinched his left index finger between two pieces of plate. The employee suffered an amputation of soft tissue at the fingertip, which required hospitalization.

An employee was walking under a section of scaffold when he tripped over one of the scaffold bars around the base. He landed on his hip on top of a small piece of metal grating, which had a toeboard installed around a small opening. The employee fractured the femoral head on his right hip and was hospitalized.

An employee walked into the breakroom and clocked into work. She then stepped backward, tripped, and fell backward. She struck her head on the wall and landed on her back on the floor. The employee was hospitalized with a compression fracture of her L3 vertebra.

An employee was operating a panel saw when a piece of wood got stuck in the dust collection vent. He was clearing the jam when the pressure bar (that holds the material) came down on his right hand and crushed his fingers. He sustained partial amputations to the middle and ring fingertips.

An employee was adjusting the tension on a grinder belt when three of their fingers got caught in the belt and pulley and were amputated.

An employee was using a chain fall to install a liner in a mill. As he was setting the liner in place, his right index finger got stuck in a chain on the rigging, resulting in a fingertip amputation that required hospitalization and a surgical reattachment.

An employee went aloft in a bucket truck to install a rubber cover-up for the pole set. He was proceeding to frame and transfer the conductors to the new pole when he sustained electrical burns on his left side, arm, and leg that required hospitalization.

An employee was working to lower casting benches from the second floor to the first floor. The process involved several chain falls and a forklift. The employee was sitting over top of the floor opening when the bench rocked, causing him to lose balance and slide from the bench. He caught himself before falling to the floor below. The employee sustained injuries to his left shoulder, elbow, and hand. The employee was hospitalized and required surgery for his left forearm.

An employee was standing by a condiment rack while getting condiment packets to restock a food service area. Another employee came out of the nearby freezer. As the door opened, it struck the injured employee in the back of the head. The employee was hospitalized for a concussion.

An employee was helping an operator to pull a cable off a winch. The operator pulled in the line when it hooked some tree brush. The brush then whipped around and struck the employee's arm, resulting in a broken arm.

An employee was inspecting and adjusting a tray in a thermoforming machine when the the trigger switch was touched, causing the machine door to close on their right hand. The employee sustained crushing injuries to the hand.

An employee was inspecting a conveyor to see why it was not running. The employee entered the the conveyor motor area, tripped on a piece of angle iron welded to the floor, and fell. The employee sustained a fractured orbital bone.

A press was having a paster failure and the crew was working to get the ink on the paper. A press operator grounded himself and was entering the press unit when something flashed. The employee sustained third-degree burns to his head and left arm.

Around 12:45 PM, a clamp truck operator went to remove a piece of orange strap from a clamp truck that was parked outside of the office. The strap fell into a gap between the frame and the hood of the truck. The strap became caught in the engine's fan and also wrapped around the employee's hand when he went to grab it. The strap was pulled tight against the frame of the clamp truck, causing lacerations and fractures to the employee's hand. The employee was hospitalized and required surgery.