Exposure through intact skin, eyes, or other exposed tissue · Chemical burns and corrosions, unspecified
Final narrative
The injured employee was conducting maintenance at the plant and was at the reactor slurry line to open the valve to drain the slurry out so it did not solidify. Steam in the line was turned on from the control room. When the employee went to rod out the valve, the material broke loose due to the steam pressure and sprayed hot reactor slurry onto the employee. The slurry contained phosphoric acid and ammonia. The employee sustained chemical burns to both arms and was hospitalized.
HospitalizedArm(s), unspecifiedMultiple chemicals or chemical mixtures, n.e.c.
On November 27, 2023, an employee was emptying a 2-inch product line that transports sodium hydroxide liquid from a rail car to a 275-gallon tote tank. The nozzle came out of the tote and sprayed sodium hydroxide onto the employee's face. The employee was hospitalized with chemical burns to their face, mouth, and neck.
An employee was working with sulfuric acid as part of the production process. While transferring the chemical from a large container to a smaller container, it splashed on his body and hand, resulting in a chemical burn.
An employee knelt in wet concrete while performing work as a concrete finisher and sustained a chemical burn to the right shin. The employee was hospitalized and required surgery.
An employee was using a 5-gallon bucket to unload acid product from a tank. Residual product leaked into the containment area, causing the employee to sustain first- and second-degree burns to the chest, as well as third-degree burns to the arms.
An employee was transferring an alkaline cleaning chemical from a bulk container into 1-gallon containers. The employee lifted a gallon container by its label tag. The tag broke causing the container to fall approximately 14-18 inches. The container struck the ground and the contents splashed onto the employee causing chemical burns to their eyes.