MANCHESTER, CT —
OSHA Inspection: PHALO/CDT
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PHALO/CDT in 90 & 203 PROGRESS DRIVE, MANCHESTER, CT 06040 (NAICS 000000). OSHA activity number 102793882.
Where did this inspection happen?
- Establishment
- PHALO/CDT
- Site address
- 90 & 203 PROGRESS DRIVE
- City
- MANCHESTER
- State
- CT
- ZIP
- 06040
- Mailing
- 90 PROGRESS DRIVE, MANCHESTER, CT 06040
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3357
- Employees
- 160
- Ownership type
- A
Citations
26 citations on file for this inspection.
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $1125.00 · Current $563.00 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the unexpected release of reels of cable due to the improper installation of winches for lifting applicatins and inadequate equipment inspections: BUILDING 203, TWINNING: WINCHES WERE INSTALLED ON TWINNERS T47, T48, T49, T50, T51 AND T52 TO LIFT REELS OF CABLE. 1.AS PER INFORMATION PROVIDED ON THE WINCH INFORMATION PLATES, THEY WERE NOT SUITABLE FOR LIFTING APPLICATIONS. 2.HOOK ATTACHMENTS WERE NOT PROPERLY INSTALLED ACCORDING TO EITHER MANUFACTURER'S RECOMMENDATIONS OR WIDELY PUBLISHED GUIDELINES. THIMBLES WERE NOT USED, WIRE ROPE CLIPS WERE IMPROPERLY INSTALLED AND HAND SWAGES WERE USED. 3.WIRE ROPE CONTAINED BROKEN AND FRAYED WIRES. ONE FEASIBLE AND ACCEPTABLE METHOD TO CORRECT THE HAZARD, AMONG OTHERS, IS TO: 1.REPLACE WINCHES WITH HOISTS THAT WERE DESIGNED AND APPROVED FOR LIFTING APPLICATIONS. 2.INSTALL HOOK ATTACHMENT IN ACCORDANCE WITH MANUFACTURER'S GUIDELINES OR OTHER WIDELY ACCEPTED GUIDELINES. 3.DEVELOP AND IMPLEMENT A SCHEDULE OF REGULAR, DOCUMENTED INSPECTIONS FOR LIFTING EQUIPMENT.S
Recent events (2)
- — I (S) $562.50
- — Z (S) $1125.00
1910.23 C01
- Issued
- Abate by
- Penalty
- Initial $1125.00 · Current $563.00 Reduced
Recent events (2)
- — I (S) $562.50
- — Z (S) $1125.00
1910.110 B06 VI
- Issued
- Abate by
- Penalty
- Initial $1125.00 · Current $563.00 Reduced
Recent events (2)
- — I (S) $562.50
- — Z (S) $1125.00
1910.253 B04 III
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C04 II
- Issued
- Abate by
- Penalty
- Initial $1500.00 · Current $750.00 Reduced
Recent events (2)
- — I (S) $750.00
- — Z (S) $1500.00
1910.147 C05 I
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1910.332 B01
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1910.333 B02 I
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1910.219 C02 I
- Issued
- Abate by
- Penalty
- Initial $1500.00 · Current $750.00 Reduced
Recent events (2)
- — I (S) $750.00
- — Z (S) $1500.00
1910.219 C04 I
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1910.219 E03 I
- Issued
- Abate by
- Penalty
- Initial $1500.00 · Current $750.00 Reduced
Recent events (2)
- — I (S) $750.00
- — Z (S) $1500.00
1910.219 F03
- Issued
- Abate by
- Penalty
- Initial $1500.00 · Current $750.00 Reduced
Recent events (2)
- — I (S) $750.00
- — Z (S) $1500.00
1910.304 F04
- Issued
- Abate by
- Penalty
- Initial $956.00 · Current $478.00 Reduced
Recent events (2)
- — I (S) $478.00
- — Z (S) $956.00
1910.304 F05 V
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1910.305 B01
- Issued
- Abate by
- Penalty
- Initial $1500.00 · Current $750.00 Reduced
Recent events (2)
- — I (S) $750.00
- — Z (S) $1500.00
1910.305 F
- Issued
- Abate by
- Penalty
- Initial $1125.00 · Current $563.00 Reduced
Recent events (2)
- — I (S) $562.50
- — Z (S) $1125.00
1910.305 G01 I
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1910.305 G01 III
- Issued
- Abate by
- Penalty
- Initial $1125.00 · Current $563.00 Reduced
Recent events (2)
- — I (S) $562.50
- — Z (S) $1125.00
1910.305 G02 II
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1910.305 G02 III
- Issued
- Abate by
Recent events (2)
- — I (S)
- — Z (S)
1910.22 B01
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.146 C02
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.178 P01
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.215 B09
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.242 B
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
1910.306 B02
- Issued
- Abate by
Recent events (2)
- — I (O)
- — Z (O)
More inspections at PHALO/CDT
MANCHESTER, CT—2001-01-23 00:00:00
PHALO/CDT
View PHALO/CDT's full OSHA safety record →
More inspections in this industry (NAICS 000000)
SCHENECTADY, NY—2012-01-05 00:00:00
BRUCE D. BOWMAN
BILLINGS, MT—2005-01-25 00:00:00
KGC, INC.
ROCKAWAY, NJ—2002-12-31 00:00:00
ROCKAWAY BOROUGH DPW
FOREST CITY, NC—2002-12-31 00:00:00
HARRY BRICKEY DBA A. BRICKEY CEILING COMPANY
EDGERTON, KS—2002-12-31 00:00:00
SUDDEN BOND INDUSTRIES
More inspections in CT
ENFIELD, CT—2026-07-16 00:00:00
MOMS ENFIELD
DAYVILLE, CT—2026-07-16 00:00:00
HARBOR FREIGHT
NEW BRITAIN, CT—2026-07-14 00:00:00
JANANII, LLC
NEWINGTON, CT—2026-07-14 00:00:00
TRUSS MANUFACTURING INC
NORTH BRANFORD, CT—2026-07-14 00:00:00
NYK STATEWIDE MOLINA CONSTRUCTION LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 102793882.