Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: WOODSTONE, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of WOODSTONE, INC. in 555 EAST DIENHARD, MCCALL, ID 83638 (NAICS 000000). OSHA activity number 107235012.

Watch Woodstone, INC. — free Get an email when a new federal OSHA severe-injury report for Woodstone, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
WOODSTONE, INC.
Site address
555 EAST DIENHARD
City
MCCALL
State
ID
ZIP
83638
Mailing
POST OFFICE BOX 98, BURLEY, ID 83635
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Data loaded
NAICS code
000000
SIC code (legacy)
1542
Employees
20
Ownership type
A
Industry flags
Construction safety.

6 citations on file for this inspection.

5(a)(1)

Serious Gravity 03 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1000.00 · Current $500.00 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The
employer did not furnish employment and a place of employment which were
free from recognized hazards that were causing or likely to cause death or
serious physical harm to employees:
(a)   Department of State Lands Construction Project, McCall, Idaho
-
On or about April 15, 1993 and at times prior thereto,
employees
working on an iron beam were not adequately protected from the
12-18 foot fall hazard.  The employees were not using
appropriate fall protection in that they were wearing
leather/canvass tool belts with wire rope attached to the
belts
by saddle clamps.  The belt/wire rope combination was secured
to the beam with a clevis clamp.
Among other methods, feasible and acceptable abatement methods to correct
this hazard are the proper use of a safety harness and lanyard or the use
of an aerial lift.
Abatement Note:  Any fall protection system must be used in accordance
with
the manufacturer's specifications.  In general, safety belts are designed
to retain a person in a work position and reduce the probability of a
fall.
For a safety belt to be a component of an approved fall arrest system, it
must be designed by the manufacturer for fall arrest, be equipped with a D
ring located at the back of the belt, and be used with shock absorbing
lanyard to reduce the stopping force below the required 900 pounds.  A
preferred fall arrest system includes a body harness with a shock
absorbing
lanyard.
Recent events (2)
  • — I (S) $500.00
  • — Z (S) $1000.00

1910.219 F03

Serious Gravity 01 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $225.00 · Current $125.00 Reduced
Recent events (2)
  • — I (S) $125.00
  • — Z (S) $225.00

1926.102 A01

Serious Gravity 02 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $300.00 · Current $150.00 Reduced
Recent events (2)
  • — I (S) $150.00
  • — Z (S) $300.00

1926.1053 B01

Serious Gravity 01 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $225.00 · Current $100.00 Reduced
Recent events (2)
  • — I (S) $100.00
  • — Z (S) $225.00

1926.59 E01

Other-than-serious Gravity 01 1 instance 7 exposed
Issued
Abate by
Recent events (2)
  • — I (O)
  • — Z (O)

1926.602 C01 II

Other-than-serious Gravity 01 1 instance 2 exposed
Issued
Abate by
Recent events (2)
  • — I (O)
  • — Z (O)

View WOODSTONE, INC.'s full OSHA safety record →

KGC, INC.

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 107235012.