EAU CLAIRE, WI —
OSHA Inspection: PITT-DES MOINES, INC. DBA PDM BRIDGE
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of PITT-DES MOINES, INC. DBA PDM BRIDGE in 2800 MELBY ST., EAU CLAIRE, WI 54703 (NAICS 000000). OSHA activity number 300249968.
Where did this inspection happen?
- Establishment
- PITT-DES MOINES, INC. DBA PDM BRIDGE
- Site address
- 2800 MELBY ST.
- City
- EAU CLAIRE
- State
- WI
- ZIP
- 54703
- Mailing
- PO BOX 1545, EAU CLAIRE, WI 54702
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 000000
- SIC code (legacy)
- 3441
- Employees
- 240
- Ownership type
- A
Citations
3 citations on file for this inspection.
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $5000.00 · Current $2500.00 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: (a) Steel beam storage yard, hazard of employees being crushed by and/or caught between steel beams due to the failure by compression or bending of the wood cribbing used for beam support. The employer did not provide an adequate program to determine the load capacities of the wood block cribbing used to support steel beams. (b) Employees were not trained in the load capacities of wood block cribbing, and were not trained in the proper location for placement of wood cribbing in the stack of steel beams. Among other methods, feasible and acceptable methods to correct the hazard include: (a) Establish a program and procedures to evaluate and determine the load capacities of the wood cribbing used to support the steel beams by using accepted good engineering practices. (b) Establish a training program to train employees in the load capacities of the wood cribbing. (c) Establish a training program to train employees in the proper placement of wood cribbing in the stack of steel beams when used to support the load. (d) Use cribbing material that is not susceptible to failure by compression or bending.ion
Recent events (3)
- — P (S) $2500.00
- — I (S) $2500.00
- — Z (S) $5000.00
1910.146 C01
- Issued
- Abate by
1910.146 C02
- Issued
- Abate by
More inspections in this industry (NAICS 000000)
SCHENECTADY, NY—2012-01-05 00:00:00
BRUCE D. BOWMAN
BILLINGS, MT—2005-01-25 00:00:00
KGC, INC.
ROCKAWAY, NJ—2002-12-31 00:00:00
ROCKAWAY BOROUGH DPW
FOREST CITY, NC—2002-12-31 00:00:00
HARRY BRICKEY DBA A. BRICKEY CEILING COMPANY
EDGERTON, KS—2002-12-31 00:00:00
SUDDEN BOND INDUSTRIES
More inspections in WI
WAUSAU, WI—2026-07-16 00:00:00
MIRON CONSTRUCTION CO. INC.
ELROY, WI—2026-07-15 00:00:00
WABASH NATIONAL SERVICES, L.P.
SUSSEX, WI—2026-07-15 00:00:00
KINGS SUPERIOR CONSTRUCTION LLC
DELAVAN, WI—2026-07-15 00:00:00
TERONOMY BUILDERS, INC.
DELAVAN, WI—2026-07-15 00:00:00
A. GOMEZ CARPENTRY, INC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 300249968.