MARINETTE, WI —
OSHA Inspection: KLEINERT INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of KLEINERT INC. in EAGLE COVE CANDOS CLEVELAND DRIVE, MARINETTE, WI 54143 (NAICS 238130). OSHA activity number 304016611.
Where did this inspection happen?
- Establishment
- KLEINERT INC.
- Site address
- EAGLE COVE CANDOS CLEVELAND DRIVE
- City
- MARINETTE
- State
- WI
- ZIP
- 54143
- Mailing
- 21135 U. S. HWY 151, VALDERS, WI 54245
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Data loaded
Establishment context
- NAICS code
- 238130
- SIC code (legacy)
- 1751
- Employees
- 16
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $1050.00 · Current $735.00 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to multiple injuries or death from tipping hazard when using an oversized platform on a rough terrain truck: At the site, employees were exposed to multiple and or death created by the use of an elevated work platform which was not designed, constructed, and/or used in accordance with the acceptable requirements of the American Safety Standards for Rough Terrain Forklift Trucks, ASME/ANSI B56.6a-1998 and other acceptable industry practices. For example, the platform did not meet the following design and use requirements of sections 8.25 and 5.15 of ASME/ANSI B56.6a in the following areas: (1) Platform dimension exceeded in width more than 10 inches greater than the overall width of the truck on either side, (2) Did not have the maximum work load and empty weight information prominently marked on the platform, (3) Controls were not installed on the elevating platform and/or an operator at the controls. (a)At the site, employees were exposed to a tipping hazard when working from a 16 foot basket attached to a rough terrain truck with a 9 foot wheel base. The platform did not have weight load information, and employees were working from the platform when the operator was not at the controls. Among other methods, feasible and acceptable means to correct these hazards are to use safer alternate methods such as a scaffold or use a platform approved by the manufacturer meeting the design, manufacture, and requirements as ASME/ANSI B56.6a-1998 for all attachments on rough terrain forklifts. Abatement Certification and Abatement Documentation required.
Recent events (2)
- — I (S) $735.00
- — Z (S) $1050.00
1926.501 B01
- Issued
- Abate by
- Penalty
- Initial $1050.00 · Current $735.00 Reduced
Recent events (2)
- — I (S) $735.00
- — Z (S) $1050.00
1926.21 B02
- Issued
- Abate by
1926.403 B02
- Issued
- Abate by
1926.1052 C01 I
- Issued
- Abate by
More inspections in this industry (NAICS 238130)
FAIRHOPE, AL—2026-07-16 00:00:00
FRANCISCO ARES
WOODHAVEN, MI—2026-07-16 00:00:00
G.J. PERELLI CO., L.L.C.
PHILADELPHIA, PA—2026-07-16 00:00:00
URUS CONSTRUCTION CORPORATION
BERLIN, NJ—2026-07-16 00:00:00
URUS CONSTRUCTION CORPORATION
MERIDIAN, ID—2026-07-15 00:00:00
TRIPLE R CONSTRUCTION LLC
More inspections in WI
WAUSAU, WI—2026-07-16 00:00:00
MIRON CONSTRUCTION CO. INC.
ELROY, WI—2026-07-15 00:00:00
WABASH NATIONAL SERVICES, L.P.
SUSSEX, WI—2026-07-15 00:00:00
KINGS SUPERIOR CONSTRUCTION LLC
DELAVAN, WI—2026-07-15 00:00:00
TERONOMY BUILDERS, INC.
DELAVAN, WI—2026-07-15 00:00:00
A. GOMEZ CARPENTRY, INC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 304016611.