Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: OH DISTRIBUTORS, INC. DBA AUTO PARTS UNLIMITED

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of OH DISTRIBUTORS, INC. DBA AUTO PARTS UNLIMITED in 3201 WELLINGTON COURT, SUITE 112, RALEIGH, NC 27615 (NAICS 423120). OSHA activity number 307211748.

Watch OH Distributors, INC. DBA Auto Parts Unlimited — free Get an email when a new federal OSHA severe-injury report for OH Distributors, INC. DBA Auto Parts Unlimited is published. One employer, no account, unsubscribe in one click.
Site address
3201 WELLINGTON COURT, SUITE 112
City
RALEIGH
State
NC
ZIP
27615
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423120
SIC code (legacy)
5013
Employees
18
Ownership type
A
Industry flags
Manufacturing safety.

12 citations on file for this inspection.

95012901

Serious 3 instances 5 exposed
Issued
Abate by
Penalty
Initial $350.00 · Current $245.00 Reduced
North Carolina General Statute 95-129(1) of the Occupational Safety and
Health Act of
North Carolina: The employer did not furnish to each of his employees
conditions of
employment and a place of employment free from recognized hazards that
were causing or
likely to cause death or serious physical harm to employees, in that
employees were exposed
to being struck by stored materials falling from the shelving::
a)site, warehouse, oil bay room - multiple metal storage racks, Reliable
Upright,
model #RU27420216 and Reliable Beam, model #RBN55144, 2 shelves high,
with 1 shelf each set at approximately 79 inches and 158 inches above the
concrete floor,  where vertical legs/footings were not appropriately
secured to
the floor with 2 metal bolts, but had only one bolt attached and in place,
and
exhibited visible stress and bend/twist in the legs, along with visible
stress and
obvious bend/flex in the shelves causing 3 unsecured and unrestrained
pallets
weighing up to approximately 2300 - 2400 pounds each (total weight of
approximately 6900 lbs) to lean and tilt in an unbalanced manner on beams
rated at 4800 lbs total maximum weight.
One feasible and acceptable abatement method, among others, to correct this
hazard is to post the maximum load capacity allowed and test the loads to
insure that the maximum load capacity is not exceeded; and/or replace the
metal storage racks and/or necessary components with equipment which
clearly
exceeds the facilitys highest known and/or intended load.
(Reference: Manufacturer, Wireway/Husky Corporation, 6146 Denver
Industrial Park, Denver, NC 28037, Specification Sheet for Horizontal &
Diagonal Bracing, Upright & Beam Selection, Capacities, Upright 42" x 18',
Beam 5.5" x 144").
Recent events (2)
  • — I (S) $245.00
  • — Z (S) $350.00

1910.22 D01

Serious 3 instances 5 exposed
Issued
Abate by

1910.22 B02

Serious 3 instances 7 exposed
Issued
Abate by
Penalty
Initial $250.00 · Current $175.00 Reduced
Recent events (2)
  • — I (S) $175.00
  • — Z (S) $250.00

1910.176 A

Serious 4 instances 7 exposed
Issued
Abate by
Penalty
Initial $250.00 · Current $175.00 Reduced
Recent events (2)
  • — I (S) $175.00
  • — Z (S) $250.00

1910.176 B

Serious 3 instances 1 exposed
Issued
Abate by

1910.178 L01 II

Serious 6 instances 7 exposed
Issued
Abate by
Penalty
Initial $350.00 · Current $245.00 Reduced
Recent events (2)
  • — I (S) $245.00
  • — Z (S) $350.00

1910.178 L06

Serious 4 instances 4 exposed
Issued
Abate by

1910.305 G01 III

Serious 3 instances 5 exposed
Issued
Abate by
Penalty
Initial $125.00 · Current $100.00 Reduced
Recent events (2)
  • — I (S) $100.00
  • — Z (S) $125.00

7F0102

Other-than-serious 1 instance 3 exposed
Issued
Abate by

1910.303 G01 II

Other-than-serious 1 instance 1 exposed
Issued
Abate by

1910.305 G02 III

Other-than-serious 1 instance 5 exposed
Issued
Abate by

1910.157 C01

Other-than-serious 1 instance 2 exposed
Issued
Abate by

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 307211748.