HASTINGS, NE —
OSHA Inspection: PREMIUM PROTEIN PRODUCTS
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of PREMIUM PROTEIN PRODUCTS in 1009 WEST M ST., HASTINGS, NE 68901 (NAICS 311611). OSHA activity number 308683200.
Where did this inspection happen?
- Establishment
- PREMIUM PROTEIN PRODUCTS
- Site address
- 1009 WEST M ST.
- City
- HASTINGS
- State
- NE
- ZIP
- 68901
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311611
- SIC code (legacy)
- 2011
- Employees
- 210
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
19 citations on file for this inspection.
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $4500.00
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: Facility located at 1009 W. M St. Hastings, NE - The employer is not furnishing employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious harm to employees in that employees are exposed to the hazards of being struck by, crushed by or thrown from a powered industrial truck (forklift) in the event the operator is not restrained while operating these vehicles. The operators in this facility have been observed operating forklifts without using the seatbelts which are provided on the vehicles. Employees face the potential of being thrown from a fork lift due to the lack of restraint device usage being observed at the plant. Among other methods, feasible and acceptable methods of abatement are: 1) Develop and implement written procedures as per ASME Standard B56.1-2000, requiring operators of powered industrial trucks to utilize restraint devices provided when operating the vehicles. 2) Develop and implement a disciplinary action and procedures to ensure that employees wear restraint devices while operating these vehicles. 3) Review and audit the company's training program and trainers to ensure that information being presented is true and factual as per the latest regulatory directives and reflects OSHA policy and generally accepted industry practices such as ASME Standard B56.1-2000. 4) Ensure that all operators have received a certified powered industrial truck training course prior to them being allowed to operate the vehicles in the facility. This training should meet or exceed the requirements of 29 CFR 1910.178(l)(3). Abatement certification and abatement documentation is required for this violation. The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful. The abatement certification sheet is enclosed with the citations.ion
Recent events (3)
- — P (S)
- — F (S)
- — Z (S) $4500.00
1910.178 L01 I
- Issued
- Abate by
- Penalty
- Current $2250.00
Recent events (3)
- — P (S) $2250.00
- — F (S) $2250.00
- — Z (S)
1910.23 C01
- Issued
- Abate by
- Penalty
- Initial $4500.00 · Current $3375.00 Reduced
Recent events (3)
- — P (S) $3375.00
- — F (S) $3375.00
- — Z (S) $4500.00
1910.23 C03
- Issued
- Abate by
- Penalty
- Initial $4500.00
Recent events (2)
- — F (S)
- — Z (S) $4500.00
1910.24 F
- Issued
- Abate by
- Penalty
- Initial $2250.00 · Current $1125.00 Reduced
Recent events (2)
- — F (S) $1125.00
- — Z (S) $2250.00
1910.147 C04 II
- Issued
- Abate by
- Penalty
- Initial $4500.00 · Current $2475.00 Reduced
Recent events (3)
- — P (S) $2475.00
- — F (S) $2475.00
- — Z (S) $4500.00
1910.147 C06 I
- Issued
- Abate by
- Penalty
- Initial $4500.00
Recent events (3)
- — P (S)
- — F (S)
- — Z (S) $4500.00
1910.147 C07 I
- Issued
- Abate by
Recent events (3)
- — P (S)
- — F (S)
- — Z (S)
1910.178 L04 III
- Issued
- Abate by
- Penalty
- Initial $1800.00 · Current $900.00 Reduced
Recent events (3)
- — P (S) $900.00
- — F (S) $900.00
- — Z (S) $1800.00
1910.178 L06
- Issued
- Abate by
Recent events (3)
- — P (S)
- — F (S)
- — Z (S)
1910.212 A01
- Issued
- Abate by
- Penalty
- Initial $3325.00 · Current $3325.00
Recent events (2)
- — F (S) $3325.00
- — Z (S) $3325.00
1910.215 A04
- Issued
- Abate by
- Penalty
- Initial $1575.00 · Current $1575.00
Recent events (2)
- — F (S) $1575.00
- — Z (S) $1575.00
1910.215 B09
- Issued
- Abate by
Recent events (2)
- — F (S)
- — Z (S)
1910.219 D01
- Issued
- Abate by
- Penalty
- Initial $2250.00 · Current $2250.00
Recent events (2)
- — F (S) $2250.00
- — Z (S) $2250.00
1910.219 E03 I
- Issued
- Abate by
Recent events (2)
- — F (S)
- — Z (S)
1910.254 D09 III
- Issued
- Abate by
- Penalty
- Initial $3325.00 · Current $3325.00
Recent events (2)
- — F (S) $3325.00
- — Z (S) $3325.00
1910.305 B01
- Issued
- Abate by
- Penalty
- Initial $2250.00 · Current $2250.00
Recent events (2)
- — F (S) $2250.00
- — Z (S) $2250.00
1910.305 B02
- Issued
- Abate by
Recent events (2)
- — F (S)
- — Z (S)
1910.305 G01 III
- Issued
- Abate by
Recent events (2)
- — F (S)
- — Z (S)
More inspections at PREMIUM PROTEIN PRODUCTS
HASTINGS, NE—2010-12-20 00:00:00
PREMIUM PROTEIN PRODUCTS
HASTINGS, NE—2006-10-03 00:00:00
PREMIUM PROTEIN PRODUCTS
HASTINGS, NE—2003-11-13 00:00:00
PREMIUM PROTEIN PRODUCTS
View PREMIUM PROTEIN PRODUCTS's full OSHA safety record →
More inspections in this industry (NAICS 311611)
CRETE, NE—2026-07-15 00:00:00
SMITHFIELD FOODS
LEAKESVILLE, MS—2026-06-30 00:00:00
CUTTING EDGE MEAT COMPANY, LLC
AUGUSTA, GA—2026-06-30 00:00:00
FPL FOOD LLC
OTTUMWA, IA—2026-06-19 00:00:00
A09CS000010KWOVAAC - JBS SWIFT PORK COMPANY
NEWBERN, TN—2026-06-10 00:00:00
TYSON FOODS INC
More inspections in NE
CRETE, NE—2026-07-15 00:00:00
SMITHFIELD FOODS
OMAHA, NE—2026-07-14 00:00:00
LACO ENTERPRISES, LLC
OMAHA, NE—2026-07-10 00:00:00
WINGSTOP
LINCOLN, NE—2026-07-01 00:00:00
SMITHFIELD PACKAGED MEATS CORP.
LINCOLN, NE—2026-06-30 00:00:00
PATRIOT PLUMBING, HEATING & AC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 308683200.