OSHA Inspection: KOMPERDA'S REMODELING, INC.

Issued

2011-06-22 00:00:00

Abate by

2011-06-23 00:00:00

Penalty

Initial $2400.00 · Current $1200.00 Reduced

General-duty citation text

29 CFR 1926.300(b)(2): Moving part(s) of equipment exposed to contact by employees or which otherwise created a hazard, were not guarded:    (a) The belt and pulley on a material hoist engine was not guarded to prevent contact with moving parts.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2011-06-22 00:00:00

Abate by

2011-06-23 00:00:00

Penalty

Initial $4200.00 · Current $1800.00 Reduced

General-duty citation text

29 CFR 1926.451(g)(1)(i): Each employee on a boatswains' chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold was not protected by a personal fall arrest system:    a) Employees were exposed to the hazard of falling approximately 22 feet while working from ladder jack scaffolding without the benefit of fall protection.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2011-06-22 00:00:00

Abate by

2011-06-23 00:00:00

Penalty

Initial $3000.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.452(k)(1): Platforms exceeded a height of 20 feet (6.1 m):    a) Employees were exposed to the hazard of falling approximately 22 feet while required to work from a ladder jack scaffolding that exceeded the 20 foot maximum permissible height for ladder jack scaffolding.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2011-06-22 00:00:00

Abate by

2011-06-23 00:00:00

Penalty

Initial $4200.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.501(b)(13): Employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph (b) Note:  If using these systems was infeasible or created a greater hazard, the employer should develop and implement a fall protection plan meeting the requirements of paragraph (k) of 1926.502.    a) Employees were not protected from the hazard of falling while perfroming roofing work from a 9/12 pitched roof having a ground to eave height of approximately 23 feet.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.