Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LAND OF LINCOLN LUMBER LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of LAND OF LINCOLN LUMBER LLC in 245 INDUSTRIAL PARK ROAD, RALEIGH, IL 62977 (NAICS 321113). OSHA activity number 330982471.

Watch Land OF Lincoln Lumber LLC — free Get an email when a new federal OSHA severe-injury report for Land OF Lincoln Lumber LLC is published. One employer, no account, unsubscribe in one click.
Site address
245 INDUSTRIAL PARK ROAD
City
RALEIGH
State
IL
ZIP
62977
Mailing
12 PEACHTREE PLACE, HARRISBURG, IL 62946
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321113
Employees
8
Ownership type
A

4 citations on file for this inspection.

1910.213 H01

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4200.00 · Current $3000.00 Reduced
29 CFR 1910.213(h)(1):  The sides of the lower exposed portion of the radial saw blade was not guarded to the full diameter of the blade by a device that would automatically adjust itself to the thickness of the stock and remain in contact with stock being cut to give maximum protection possible for the operation being performed:    At the Morgan Chop Saw, MN 5K254 BL 205, the bottom portion of the 20 inch blade was unguarded.  The condition exposed employees to amputation hazards.    Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $3000
  • — Z (S) $4200

1910.219 E03 I

Other-than-serious 2 instances 3 exposed
Issued
Abate by
Penalty
Initial $3000.00 · Current $1000.00 Reduced
29 CFR 19219(e)(3)(i):  Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o):    a)At the Morgan Chop Saw, MN 5K254 BL205, the 3/4 inch notched drive belt guard 42L x 8W (inches) was open on the back side, exposing employees to nip points.    b)At the Precision Husky Shredder, SN C 2624, the 6W x 52L (inches) drive belt was unguarded, exposing employees to nip points.    Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (O) $1000
  • — Z (S) $3000

1910.219 F03

Other-than-serious 3 exposed
Issued
Abate by
Penalty
Initial $3000.00 · Current $1000.00 Reduced
29 CFR 1910.219(f)(3):  Sprocket wheels and chains which were more than seven feet or less above floors or platforms were not enclosed:    At the Board Edger, the 3/4 inch chain and sprocket assembly guard 9W x 55L (inches) was open on the underside, exposing employees to nip points.    Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (O) $1000
  • — Z (S) $3000

1910.141 D02 I

Other-than-serious 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.141(d)(2)(i):  Lavatories were not made available at the place of employment:    A washing facility consisting of a lavatory with hot and cold running potable water was not made available for employee usage.      Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (1)
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330982471.