Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DOMENIC AND SONS PAINT & BODY, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of DOMENIC AND SONS PAINT & BODY, INC. in 1011 S. SANTA FE AVE, PUEBLO, CO 81006 (NAICS 811121). OSHA activity number 330984196.

Watch Domenic AND Sons Paint & Body, INC. — free Get an email when a new federal OSHA severe-injury report for Domenic AND Sons Paint & Body, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1011 S. SANTA FE AVE
City
PUEBLO
State
CO
ZIP
81006
Mailing
1011 S. SANTA FE AVE, PUEBLO, CO 81006
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811121
Employees
6
Ownership type
A

6 citations on file for this inspection.

1910.134 C01

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(c)(1):  A written respiratory protection program with worksite-specific procedures was not established and implemented at the workplace where respirators are necessary to protect the health of the employee or whenever respirators are required by the employer:    a) On or about September 6, 2011 and times prior, the employer had not established and implemented a written Respiratory Protection program.    Abatement Note:  The respiratory protection programs shall include the elements listed in 29 CFR 1910.134(c)(1)(i)-(ix).    Abatement Verification:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
  • — Z (O) $0

1910.134 F02

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(f)(2):  Employees using a tight-fitting facepiece respirator were not fit tested prior to initial use of the respirator, and at least annually thereafter:    a) On or about September 6, 2011 and times prior, employees were exposed to illnesses in that, the employees were required to wear full face respirators prior to being annually fit tested.    Abatement Note:  Fit testing shall follow the requirements listed in 29 CFR 1910.134(f).    Abatement Verification:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
  • — Z (O) $0

1910.134 H01 I

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(h)(1)(i):  Respirators issued for the exclusive use of an employee were not cleaned and disinfected as often as necessary to be maintained in a sanitary condition:    a) On or about September 6, 2011 and times prior, employees were exposed to potential illnesses when wearing a respirator that was not maintained in a sanitary condition.    Abatement Verification:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
  • — Z (O) $0

1910.1200 F05 I

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(f)(5)(i):  The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical(s) contained therein:    a) On or about September 6, 2011 and times prior, employees were exposed to injury/illness in that, a steel drum located in the painting area containing lacquer thinner, a flammable was not labeled as to its contents.    Abatement Verification:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
  • — Z (O) $0

1910.1200 F05 II

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(f)(5)(ii):  The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the appropriate hazard warnings:    a) On or about September 6, 2011 and times prior, employees were exposed to injury/illness in that, a steel drum located in the painting area containing lacquer thinner, a flammable was not labeled as to its hazards.    Abatement Verification:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(h): Employees were not provided effective information and training as specified in 29 CFR 1910.1200(h)(1) and (2) on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard was introduced into their work area:      a) On or about September 6, and times prior, the employer did not provide training to the employees prior to placing them into the work place where chemicals, such as, but not limited to, lacquer thinner, a flammable were used.    Abatement Verification:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330984196.