Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: LAMOREAU IMPROVEMENTS INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of LAMOREAU IMPROVEMENTS INC. in 735 LEEMAN HIGHWAY, BATH, ME 04530 (NAICS 238130). OSHA activity number 333291102.

Watch Lamoreau Improvements INC. — free Get an email when a new federal OSHA severe-injury report for Lamoreau Improvements INC. is published. One employer, no account, unsubscribe in one click.
Site address
735 LEEMAN HIGHWAY
City
BATH
State
ME
ZIP
04530
Mailing
233 CARDING MACHINE ROAD, BOWDOINHAM, ME 04008
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

6 citations on file for this inspection.

1926.304 F

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3300.00 · Current $2310.00 Reduced
29 CFR 1926.304(f):     All woodworking tools and machinery did not meet other applicable requirements of American National Standards Institute, 01.1-1961, Safety Code for Woodworking Machinery:    At the Jobsite - The 8-inch Dewalt table saw was not provided with a hood guard.
Recent events (2)
  • — I (S) $2310
  • — Z (S) $3300

1926.304 F

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.304(f):     All woodworking tools and machinery did not meet other applicable requirements of American National Standards Institute, 01.1-1961, Safety Code for Woodworking Machinery:    At the Jobsite - The 8-inch Dewalt table saw was not provided with a spreader.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.304 F

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.304(f):     All woodworking tools and machinery did not meet other applicable requirements of American National Standards Institute, 01.1-1961, Safety Code for Woodworking Machinery:    At the Jobsite - The 8-inch Dewalt table saw was not provided with a anti-kickback fingers.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.304 F

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3300.00 · Current $0.00 Reduced
29 CFR 1926.304(f):     All woodworking tools and machinery did not meet other applicable requirements of American National Standards Institute, 01.1-1961, Safety Code for Woodworking Machinery:    At the Jobsite - The 8-inch Dewalt table saw was not provided with anti-restart protection.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3300

1926.404 B01 I

Serious Gravity 1 2 instances 1 exposed
Issued
Abate by
Penalty
Initial $1980.00 · Current $1386.00 Reduced
29 CFR 1926.404(b)(1)(i):     The employer did notl use either ground fault circuit interrupters as specified inparagraph (b)(1)(ii) of this section or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section toprotect employees on construction sites. These requirements are in addition to any other requirements for equipment grounding conductors:    At the Jobsite - The employer did not use either ground fault interrupters as specified or an assured grounding program.
Recent events (2)
  • — I (S) $1386
  • — Z (S) $1980

1926.501 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3960.00 · Current $2772.00 Reduced
29 CFR 1926.501(b)(1):     Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrailsystems, safety net systems, or personal fall arrest systems:    At the Jobsite - The employee working on the overhang was not properly utilizing any type of fall protection system.
Recent events (2)
  • — I (S) $2772
  • — Z (S) $3960

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 333291102.