CORDOVA, IL —
OSHA Inspection: EXELON CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of EXELON CORPORATION in 22710 206TH AVE N, CORDOVA, IL 61242 (NAICS 221113). OSHA activity number 334097227.
Where did this inspection happen?
- Establishment
- EXELON CORPORATION
- Site address
- 22710 206TH AVE N
- City
- CORDOVA
- State
- IL
- ZIP
- 61242
- Mailing
- 22710 206TH AVE N, CORDOVA, IL 61242
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 221113
- Employees
- 950
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.219 C02 I
- Issued
- Abate by
- Penalty
- Initial $3400.00 · Current $3400.00
General-duty citation text
29 CFR 1910.219(c)(2)(i): Exposed part(s) of horizontal shafting were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting:
Recent events (3)
- — F (O) $3400
- — C (S) $3400
- — Z (S) $3400
1910.219 C03
- Issued
- Abate by
- Penalty
- Initial $3400.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.219(c)(3): Vertical and inclined shafting seven (7) feet or less from floor or working platform were not enclosed with a stationary casing in accordance with requirements of paragraphs (m) and (o) of this section: An employee was exposed to becoming entangled with: a. the rotating vertical shaft connected to the 1A-4401 Unit 1 Circulation Water Pump located in the Crib House Basement because the roating vertical shaft was not enclosed or guarded in accordance with the standard. b. the rotating vertical shaft connected to the 1B-4401 Unit 1 Circulation Water Pump located in the Crib House Basement because the rotating vertical shaft was not enclosed or guarded in accordance with the standard. c. the rotating vertical shaft connected to the 1C-4401 Unit 1 Circulation Water Pump located in the Crib House Basement because the rotating vertical shaft was not enclosed or guarded in accordance with the standard. d. the rotating vertical shaft connected to the 2A-4401 Unit 2 Circulation Water Pump located in the Crib House Basement because the rotating veritcal shaft was not enclosed or guarded in accordance with the standard. e. the rotating vertical shaft connected to the 2B-4401 Unit 2 Circulation Water Pump located in the Crib House Basement because the rotating vertical shaft was not enclosed or guarded in accordance with the standard. f. the rotating veritcal shaft connected to the 2C-4401 Unit 2 Circulation Water Pump located in the Crib House Basement because the rotating vertical shaft was not enclosed or guarded in accordance with the standard.
Recent events (3)
- — F (S) $0
- — C (S) $3400
- — Z (S) $3400
1910.219 D01
- Issued
- Abate by
- Penalty
- Initial $4250.00 · Current $4250.00
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven (7) feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): An employee was exposed to amputation hazards because: a. the pulley located at the 1/2-4603A Sparge Air Compressor was less than seven feet off the floor and was not guarded in accordance with the standard. b. the pulley located at the 1/2-4603B Sparge Air Compressor was less than seven feet off the floor and was not guarded in accordance with the standard.
Recent events (3)
- — F (O) $4250
- — C (S) $4250
- — Z (S) $4250
1910.219 E01 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and(o): An employee was exposed to amputation hazards because: a. the belt located at the 1/2-4603A Sparge Air Compressor was less than seven feet off the floor and was not guarded in accordance with the standard. b. the belt located at the 1/2-4603B Sparge Air Compressor was less than seven feet off the floor and was not guarded in accordance with the standard.
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
1910.303 B02
- Issued
- Penalty
- Initial $4000.00 · Current $4000.00
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled eletrical equipment was not used or installed in accordance with instructions included in the listing or labeling: An employee was exposed to electrical hazards because a metal receptacle outlet box that contained knock-outs was hanging unsecured in the EMD Shop. The metal receptacle outlet box was not being used for its intended purpose.
Recent events (3)
- — F (O) $4000
- — C (S) $4000
- — Z (S) $4000
More inspections at EXELON CORPORATION
BYRON, IL—2019-05-30 00:00:00
EXELON CORPORATION
MIDDLETOWN, PA—2014-09-18 00:00:00
EXELON CORPORATION
FORKED RIVER, NJ—2013-11-08 00:00:00
EXELON CORPORATION
View EXELON CORPORATION's full OSHA safety record →
More inspections in this industry (NAICS 221113)
SEABROOK, NH—2026-06-03
NEXTERA ENERGY SEABROOK, LLC
COVERT, MI—2026-05-19
HOLTEC PALISADES, LLC
BYRON, IL—2026-03-12
CONSTELLATION ENERGY GENERATION, LLC
TWO RIVERS, WI—2026-02-19
NEXTERA ENERGY POINT BEACH, LLC
PENDLETON, SC—2026-02-14
77271 - DUKE ENERGY OCONEE NUCLEAR STATION
More inspections in IL
BLOOMINGTON, IL—2026-07-13
UNKNOWN CONTRACTOR
GRANITE CITY, IL—2026-07-13
UNITED STATES STEEL CORPORATION
DECATUR, IL—2026-07-10
TILLAMOOK ILLINOIS, LLC
NEW LENOX, IL—2026-07-10
A.D GENERAL CONSTRUCTION LLC
LOCKPORT, IL—2026-07-09
ROBERTO GOMEZ DBA ROBERTO GOMEZ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334097227.