HILBERT, WI —
OSHA Inspection: DS ENTERPRISES
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DS ENTERPRISES in 352 N. 3RD STREET, HILBERT, WI 54129 (NAICS 332999). OSHA activity number 334735396.
Where did this inspection happen?
- Establishment
- DS ENTERPRISES
- Site address
- 352 N. 3RD STREET
- City
- HILBERT
- State
- WI
- ZIP
- 54129
- Mailing
- P.O. BOX 181, HILBERT, WI 54129
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 10
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.23 C03
- Issued
- Abate by
- Penalty
- Initial $1600.00 · Current $640.00 Reduced
General-duty citation text
29 CFR 1910.23(c)(3): Regardless of height, open-sided floors, walkways, platforms, or runways above or adjacent to dangerous equipment, pickling or galvanizing tanks, degreasing units, and similar hazards were not guarded with a standard railing and toe board. a) Caustic soda and acid wash dip tank walls were approximately 33" high presenting a fall hazard for employees. Dip tanks were approximately 10 feet deep. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $640
- — Z (S) $1600
1910.219 C02 I
- Issued
- Abate by
- Penalty
- Initial $2400.00 · Current $960.00 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: a) Wire wheel machine being run by Marathon electric motor did not have any shaft guarding in place. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $960
- — Z (S) $2400
1910.219 C04
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.219(c)(4): Projecting shaft ends were not guarded. a) Wire wheel machine being run by Marathon electric motor did not have any shaft end guarding in place. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 D01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Wire wheel machine being run by Marathon electric motor did not have any belt and pulley guarding in place. b) Alva F Allen Model BT-5 Rod Shear was being operated without belt and pulley guarding. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 E03 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o) a) Wire wheel machine being run by Marathon electric motor did not have any belt and pulley guarding in place. b) Alva F Allen Model BT-5 Rod Shear was being operated without belt and pulley guarding. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.243 C03
- Issued
- Abate by
- Penalty
- Initial $1600.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.243(c)(3): Abrasive wheels used on vertical portable grinder(s) (right angle head grinders) were not provided with safety guard(s) having a maximum exposure angle of 180 degrees and located between the operator and wheel: a) Metabo W7-115 Quick hand grinder was being used without a guard. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $1600
1910.151 C
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) Emergency Eye and Skin Wash Station bottles were expired (12/10/2008) ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at DS ENTERPRISES
HILBERT, WI—2012-06-28 00:00:00
DS ENTERPRISES
View DS ENTERPRISES's full OSHA safety record →
More inspections in this industry (NAICS 332999)
SMITHFIELD, UT—2026-07-16
METAL VISION INC.
MINNEAPOLIS, MN—2026-07-15
111597 - CHANDLER INDUSTRIES INC - BLAINE DIVISION
SPRING, TX—2026-07-10
DORSTENER WIRE TECH INC.
SAN ANTONIO, TX—2026-07-10
ED LONG'S METAL WORKS
HUNTINGDON VALLEY, PA—2026-07-09
METAL ALLIANCE, INC.
More inspections in WI
WAUSAU, WI—2026-07-16
MIRON CONSTRUCTION CO. INC.
ELROY, WI—2026-07-15
WABASH NATIONAL SERVICES, L.P.
SUSSEX, WI—2026-07-15
KINGS SUPERIOR CONSTRUCTION LLC
DELAVAN, WI—2026-07-15
TERONOMY BUILDERS, INC.
DELAVAN, WI—2026-07-15
A. GOMEZ CARPENTRY, INC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334735396.