Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: DENNIS BUSH CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of DENNIS BUSH CONSTRUCTION in 8032 NW 134TH TERR., OKLAHOMA CITY, OK 73162 (NAICS 238130). OSHA activity number 334844180.

Watch Dennis Bush Construction — free Get an email when a new federal OSHA severe-injury report for Dennis Bush Construction is published. One employer, no account, unsubscribe in one click.
Site address
8032 NW 134TH TERR.
City
OKLAHOMA CITY
State
OK
ZIP
73162
Mailing
1320 W. HILLCREST DR., MUSTANG, OK 73064
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
6
Ownership type
A

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 1 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $1020.00 · Current $612.00 Reduced
29 CFR 1926.102(a)(1):   Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents.     On or about June 12, 2012 and at times prior thereto, employees were using a circular saw and were not provided with eye protection.  They were exposed to the hazard of having saw dust and debris fall into their eyes.
Recent events (2)
  • — I (S) $612
  • — Z (S) $1020

1926.304 D

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $1156.00 · Current $694.00 Reduced
29 CFR 1926.304(d):   Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe:  (a)(LOCATION)(IDENTIFY SPECIFIC OPERATION(S) AND/OR EQUIPMENT, INCLUDING SERIAL NUMBER, MODEL, ETC.)(KIND OF WORK BEING DONE)(DESCRIBE WHICH GUARD IS MISSING)    On or about June 12, 2012 and at times prior thereto, employees were using the circular saw with the blade guard tied in the upper position, preventing it from covering the blade when the saw was not in use.  Employees were exposed to cuts.
Recent events (2)
  • — I (S) $693.6
  • — Z (S) $1156

1926.451 B02

Serious Gravity 5 3 instances 4 exposed
Issued
Abate by
Penalty
Initial $1700.00 · Current $1020.00 Reduced
29 CFR 1926.451(b)(2):   Scaffold platforms and walkways were not at least 18 inches wide:     On or about June 12, 2012, and at times prior thereto, employees were working from a makeshift scaffod plank that was not at least 18 inches wide.  They were exposed to a fall of up to 15 feet.
Recent events (2)
  • — I (S) $1020
  • — Z (S) $1700

1926.501 B13

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $1700.00 · Current $1020.00 Reduced
29 CFR 1926.501(b)(13):   Employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph (b)  Note:  If using these systems was infeasible or created a greater hazard, the employer should develop and implement a fall protection plan meeting the requirements of paragraph (k) of 1926.502.    On or about June 12, 2012 and at times prior thereto, employees were working at a height over 10 feet and were not provided fall protection.  They were exposed to a fall of over ten feet.
Recent events (2)
  • — I (S) $1020
  • — Z (S) $1700

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334844180.