Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: ZORLENZAN'S AMUSEMENTS INC.

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of ZORLENZAN'S AMUSEMENTS INC. in 1001 CROOKED HILL RD., BRENTWOOD, NY 11717 (NAICS 713990). OSHA activity number 336093182.

Watch Zorlenzan'S Amusements INC. — free Get an email when a new federal OSHA severe-injury report for Zorlenzan'S Amusements INC. is published. One employer, no account, unsubscribe in one click.
Site address
1001 CROOKED HILL RD.
City
BRENTWOOD
State
NY
ZIP
11717
Mailing
1467 MADISON ST., ELMONT, NY 11003
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
713990
Employees
4
Ownership type
A

5 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1680.00 Reduced
OSH ACT of 1970 Section (5)(a)(1):   The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm in that employees are exposed to struck by hazards.      Worksite, 1001 Crooked Hill Rd. Brentwood NY - An amusement park ride operator was struck by the spinning bucket of a ride called The Scat, while standing below the operators platform; on or about 09/01/12.    Note:  The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2800

1910.147 C01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1680.00 Reduced
29 CFR 1910.147(c)(1):   The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative    a)  Worksite, 1001 Crooked Hill Rd. Brentwood NY - Employees perform maintenance functions on machines such as but not limited to the Scat, Merry-Go-Round, and Ferris Wheel.  There was no Lockout Tagout program; on or about 09/01/12.      Note:  In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2800

1910.147 C04 I

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1680.00 Reduced
29 CFR 1910.147(c)(4)(i):  Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    a)  Worksite, 1001 Crooked Hill Rd. Brentwood NY - Employees performing maintenance functions on machines such as but not limited to the Scat, Merry-Go-Round, and Ferris Wheel, were not provided with documeted procedures to control hazardous energy; on or about 09/01/12.      Note:  In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2800

1910.147 C05 I

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.147(c)(5)(i):   Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources:    a)  Worksite, 1001 Crooked Hill Rd. Brentwood NY - Employees performing maintenance functions on machines such as but not limited to the Scat, Merry-Go-Round, and Ferris Wheel, were not provided with a sufficient set of hardware to control all sources of energy; on or about 09/01/12.      Note:  In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C07 I

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.147(c)(7)(i):  The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees:      a)  Worksite, 1001 Crooked Hill Rd. Brentwood NY - Employees operating and performing maintenance functions on machines such as but not limited to the Scat, Merry-Go-Round, and Ferris Wheel, were not provided with all lockout-tagout training elements; on or about 09/01/12.      Note:  In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336093182.