OSHA Inspection: JD GRAPHIC., CO INC

Issued

2012-10-12 00:00:00

Abate by

2012-11-30 00:00:00

Penalty

Initial $2000.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i):  The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed.    a) Press area east side - The employer did not ensure that a periodic inspection of the energy control procedure was conducted at least annually to ensure that the procedures and requirements were properly implemented and followed while employees conducted roller change outs on equipment such as, the Heidelberg Harris Printstream Printing presses.

Issued

2012-10-12 00:00:00

Abate by

2012-11-02 00:00:00

Penalty

Initial $2000.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.147(d)(4)(i):  Lockout or tagout devices were not affixed to each energy isolating device by authorized employees.    a) Press area east side - Lockout or tagout devices were not affixed to each energy isolating device by authorized employees while employees conducted roller change outs on equipment such as, the Heidelberg Harris Printstream 100 printing press.

Issued

2012-10-12 00:00:00

Abate by

2012-11-02 00:00:00

Penalty

Initial $1600.00 · Current $800.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(4)(iii):  An evaluation of each powered industrial truck operators performance was not conducted at least once every 3 years.    a) Facility wide - The employer did not ensure that all employees who operated powered industrial trucks, such as the Crown Walker SN# 5A359361, Toyota Walker SN#24658, Toyota sit-down forklift SN#5FBCU25, and the Crown sit-down forklift SN# 27245054, were properly trained, evaluated and certified to perform the tasks in a safe manner at least once every three years.

Issued

2012-10-12 00:00:00

Abate by

2012-11-02 00:00:00

Penalty

Initial $1600.00 · Current $800.00 Reduced

General-duty citation text

29 CFR 1910.179(g)(1)(v):  Pendant control box(es) were not clearly marked for identification of functions.    a)  Printstream 100; east side - The employer did not ensure that pendant control boxes, on equipment such as the Megtech Butler 5000 pound crane were clearly marked for the operator to identify the functions of the control buttons.

Issued

2012-10-12 00:00:00

Abate by

2012-11-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.179(j)(2):  The items listed in subparagraphs (j)(2)(i)-(vii) were not inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, and all deficiencies were not carefully examined and a determination made as to whether they constituted a safety hazard.    a) Printstream 100; east side - Cranes in regular service, such as the Megtech Butler 5000 Pound crane, were not inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, including observation during operation for any defects which might appear between regular inspections.

Issued

2012-10-12 00:00:00

Abate by

2012-11-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.179(j)(3):  Complete inspections of the crane was not being performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section.    a) Printstream 100; east side - The employer did not perform a complete periodic inspection on cranes such as the Megtech Butler 5000 Pound crane in intervals as generally defined in paragraph (j)(1)(ii)(b) of this section.  These inspections were to include the requirements of paragraph (j)(2) through (j)(2)(v)(iii).

Issued

2012-10-12 00:00:00

Abate by

2012-11-30 00:00:00

Penalty

Initial $2000.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii):  Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle.    a) Folding Area - The employer did not ensure that the point of operation on machinery was guarded to prevent employees from having any part of their body in the danger zone(s) during the operating cycle on equipment, such as the Challenge Paper Drill SN# 56194.

Issued

2012-10-12 00:00:00

Abate by

2012-11-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(g)(2):  Battery charging apparatus for industrial trucks located in battery changing and charging installation was not protected from damage by fork trucks.    a) Battery Charging Station - The employer did not ensure that equipment, such as the Battery Builder Inc. industrial battery charger SN# AV079400011, and the Extreme Power Charger SN# 05J25285 were protected from damage by fork trucks.