OSHA Inspection: HORIZON RESOURCES

Issued

2013-03-13 00:00:00

Abate by

2013-04-15 00:00:00

Penalty

Initial $6300.00 · Current $4410.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    (a) On or about October 24, 2012, for employees exposed to caught-in and/or amputation hazards while performing maintenance on the auger in the basement under the scale system at 215 Second Street West, Williston, North Dakota.

Issued

2013-03-13 00:00:00

Abate by

2013-04-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources:    (a) On or about October 24, 2012, for employees exposed to caught-in and/or amputation hazards while performing maintenance on the auger in the basement under the scale system at 215 Second Street West, Williston, North Dakota.

Issued

2013-03-13 00:00:00

Abate by

2013-04-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices:    (a) On or about October 24, 2012, for employees exposed to caught-in and/or amputation hazards while performing maintenance on the auger in the basement under the scale system at 215 Second Street West, Williston, North Dakota.

Issued

2013-03-13 00:00:00

Abate by

2013-03-18 00:00:00

Penalty

Initial $6300.00 · Current $4410.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point-of-operation, ingoing nip points, rotating parts, flying chips and sparks:    (a) On or about October 24, 2012, for an employee of a contractor who received an amputation injury due to a guard not being secured on the auger in the basement under the scale system at 215 Second Street West, Williston, North Dakota.

Issued

2013-03-13 00:00:00

Abate by

2013-04-15 00:00:00

Penalty

Initial $6300.00 · Current $4410.00 Reduced

General-duty citation text

29 CFR 1910.272(i)(1): The employer did not inform contractors of the applicable safety rules of the grain handling facility:    (a) On or about October 24, 2012, for employees and employees of a contractor exposed to fire hazards while cutting a natural gas pipe in the basement under the scale system with combustible grain dust present at 215 Second Street West, Williston, North Dakota.

Issued

2013-03-13 00:00:00

Abate by

2013-04-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:    (a) For employees that remove guards and perform maintenance on equipment at 215 Second Street West, Williston, North Dakota.