OSHA Inspection: MASSEY METALS INC.

Issued

2013-07-12 00:00:00

Abate by

2013-09-03 00:00:00

Penalty

Initial $2000.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:    Location:  2251 Massaro Blvd Tampa, FL - Fabrication    (a) for employees that performed routine maintenance tasks such as oiling and set up on the Advantage Accurpress, on or about February 13, 2013.    (b) for employees that performed routine maintenance tasks such as oiling rollers of the Wysong & Miles Co #860 and Peck, Stow & Wilcox Co metal rolling machines, on or about February 13, 2013.    (c) for employees that performed routine maintenance tasks such as oiling of the Accurshear, on or about February 13, 2013.

Issued

2013-07-12 00:00:00

Abate by

2013-09-03 00:00:00

Penalty

Initial $2000.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.179(j)(2):  The following items were not inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, including observation during operation for any defects which might appear between regular inspections:    Location:  2251 Massaro Blvd Tampa, FL  33619    (a)  from employees that were utilizing a Yale Series 2000 overhead crane to store metal coils located in the Fabrication area, as observed on or about February 13, 2013.

Issued

2013-07-12 00:00:00

Abate by

2013-09-03 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.179(j)(3):  A complete periodic inspection of crane(s) had not been conducted in the past 12 months:     Location:  2251 Massaro Blvd Tampa, FL  33619    (a)  for the Yale Series 2000 overhead crane located in the Fabrication area, as observed on or about February 13, 2013.

Issued

2013-07-12 00:00:00

Abate by

2013-09-03 00:00:00

Penalty

Initial $2000.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    Location:  2251 Massaro Blvd Tampa, FL  33619 - Fabrication    (a)  for the ingoing rollers of Wysong & Miles Co. #860 and Peck, Stow & Wilcox Co. metal rolling machines located in the Fabrication area, as observed on or about February 13, 2013.    (b)  for the missing interior guard for the pulleys next to the power switch of the Wysong & Miles Co. #860 metal rolling machine, as observed on or aobut February 13, 2013.

Issued

2013-07-12 00:00:00

Abate by

2013-09-03 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):    Location: 2251 Massaro Blvd. Tampa (FL)    a) for the establishment doing business as Massey Metals, Inc. as noted on or about February 13, 2013.  The employer had not certified training for employees operating the Yale LP forklift.

Issued

2013-07-12 00:00:00

Abate by

2013-09-03 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.179(b)(5): The rated load of crane(s) was not plainly marked on each side of the crane:       Location:  2251 Massaro Blvd Tampa, FL  33619    (a)  for the Yale Series 2000 overhead crane located in the Fabrication Shop area, as observed on or about February 13, 2013.

Issued

2013-07-12 00:00:00

Abate by

2013-09-03 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.255(b)(6): All foot switches were not guarded to prevent accidental operation of the machine:      Location:  2251 Massaro Blvd Tampa, FL - Fabrication    (a)  for employees that were using the pedestal spot welding machine with an unprotected foot switch, as observed on or about February 13, 2013.

Issued

2013-07-12 00:00:00

Abate by

2013-09-03 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws:    Location:  2251 Massaro Blvd. Tampa, FL - Fabrication     (a) for employees that use the foot control pedal to operate the notching machine, as observed on or about February 13, 2013.

Issued

2013-07-12 00:00:00

Abate by

2013-09-03 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    Location:  2251 Massaro Blvd Tampa, FL  33619    (a)  for chemicals such as Muriatic Acid and Stay Clean liquid soldering flux that are used by employeess, on or before February 13, 2013.