OSHA Inspection: JLA & SONS CONSTRUCTION COMPANY

Issued

2013-06-03 00:00:00

Abate by

2013-06-03 00:00:00

Penalty

Initial $1760.00 · Current $5720.00

General-duty citation text

29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:       a)  Ladder used by employees to access and egress the trench did not have its side rails extended at least 3 feet above the ground.         No abatement certification or documentation is required for this item.

Issued

2013-06-03 00:00:00

Abate by

2013-06-03 00:00:00

Penalty

Initial $15400.00 · Current $7000.00 Reduced

General-duty citation text

29 CFR 1926.651(k)(2):     Where the competent person found evidence of a situation that could result in possible cave-in, indications of failure of protective systems, hazardous atmospheres, or other hazardous conditions, exposed employee(s) was/were not removed from the hazardous area until the necessary precautions have been taken to ensure their safety.    (a) The competent person failed to ensure that an exposed employee stayed within the confines of the cave in protective system.

Issued

2013-06-03 00:00:00

Abate by

2013-06-07 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.404(f)(6):  The path to ground from circuits, equipment, or enclosures was not permanent and continuous:     a)  Extension cords, used by employees onsite, did not have permanent and continuous path to ground.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2013-06-03 00:00:00

Abate by

2013-06-07 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.416(e)(1):  Worn or frayed electric cords or cables were used:      a) The insulation on the flexible cord powering construction equipment onsite was worn as evidenced by the exposed insulated conductors.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).