OSHA Inspection: LAFOURCHE ASSOCIATED RETARDED CITIZENS

Issued

2013-06-03 00:00:00

Abate by

2013-07-19 00:00:00

Penalty

Initial $3750.00 · Current $2250.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed and documented for the control of potentially hazardous energy when employees were engaged in activities covered by this section.  The procedures shall clearly and specifically outline the means to enforce compliance including, but not limited to, the following:   The employer did not develop written procedures with specific steps for the control of potentially hazardous energy regarding machines and equipment such as, but not limited to  a) Saw Shop:     1. Lobo Upcut Saw      2. Seco Upcut Saw

Issued

2013-06-03 00:00:00

Abate by

2013-06-17 00:00:00

Penalty

Initial $3750.00 · Current $2250.00 Reduced

General-duty citation text

29 CFR 1910.242(b): Compressed air used for cleaning. Compressed air shall not be used for cleaning purposes except where reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment.    a) Saw shop; an air nozzle is routinely used for cleaning equipment at compressed air pressures up to 135 psig.

Issued

2013-06-03 00:00:00

Abate by

2013-06-07 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.303(f)(2): Services, feeders, and branch circuits. Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, shall be legibly marked to indicate its purpose, unless located and arranged so the purpose is evident.   a) Peltrie Building; The employer failed to ensure that the individual breakers inside of electrical panel BPPB#2 were labeled.