OSHA Inspection: HPL STAMPINGS, INC.

Issued

2013-06-07 00:00:00

Abate by

2013-07-03 00:00:00

Penalty

Initial $2975.00 · Current $2083.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  a) Throughout Plant Areas - The employer did not train and evaluate each operator who is authorized to operate the powered industrial vehicles to ensure they were competent to operate the truck safely.

Issued

2013-06-07 00:00:00

Abate by

2013-07-03 00:00:00

Penalty

Initial $2975.00 · Current $2083.00 Reduced

General-duty citation text

29 CFR 1910.178(m)(9): Industrial truck(s) were not fitted with overhead guard(s) as protection against falling objects:  a) Dock Area - The employer had a Catepillar powered industrial forklift truck model #40B, serial #85WOO47O, that was not fitted with an overhead guard to protect the operator against falling objects.

Issued

2013-06-07 00:00:00

Abate by

2013-07-03 00:00:00

Penalty

Initial $2380.00 · Current $1666.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:       a) Milling Department - The Bridgeport drill presses serial #J10965, and serial #J8169, were not equipped with enclosure guards to protect employees from the rotating chuck.

Issued

2013-06-07 00:00:00

Abate by

2013-07-03 00:00:00

Penalty

Initial $2975.00 · Current $2083.00 Reduced

General-duty citation text

29 CFR 1910.219(b)(1): Flywheel(s) with parts seven (7) feet or less above floor(s) or platform(s) were not guarded in accordance with the requirements specified in 29 CFR 1910.219(b)(1)(i) through (b)(1)(iv):   a) Press Department - The L&J #G-3, serial #22926, full revolution punch press, had a flywheel not completely guarded on the inside of the press.

Issued

2013-06-07 00:00:00

Abate by

2013-07-03 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.23(e)(4): Standard toeboard(s) was not four inches in nominal height from its top edge to the level of the floor, platform, runway or ramp:  a) Dye File Area - The second level platform had a toeboard that was not four inches in nominal height from its top edge to the level of the platform.