Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: YOUNG BROTHERS, LIMITED

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of YOUNG BROTHERS, LIMITED in 1331 N. NIMITZ HWY, HONOLULU, HI 96817 (NAICS 483113). OSHA activity number 339247645.

Watch Young Brothers, Limited — free Get an email when a new federal OSHA severe-injury report for Young Brothers, Limited is published. One employer, no account, unsubscribe in one click.
Site address
1331 N. NIMITZ HWY
City
HONOLULU
State
HI
ZIP
96817
Mailing
P.O. BOX 3288, HONOLULU, HI 96801
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
483113
Employees
360
Ownership type
A

5 citations on file for this inspection.

1917.151 B01

Serious Gravity 1 2 instances 4 exposed
Issued
Penalty
Initial $2250.00 · Current $1238.00 Reduced
29 CFR 1917.151(b)(1): Danger zones on machines and equipment used by employees were not guarded.  a.  Terminal, Chassis Maintenance and High Lift Maintenance - Noted on or about 8/2/13 and at times prior thereto, a  Rigid drill press and a Delta drill press were not guarded at the point of operation.
Recent events (2)
  • — I (S) $1237.5
  • — Z (S) $2250

1917.151 G01

Serious Gravity 5 2 instances 4 exposed
Issued
Penalty
Initial $3000.00 · Current $1650.00 Reduced
29 CFR 1917.151(g)(1): Safety guards for abrasive wheels were not adjustable or did not have an adjustable tongue or piece at the top of the opening where the operator must stand in front of the safety guard opening.     a.  Terminal, High Lift Maintenance and Chassis Maintenance - Noted on or about 8/2/13 and at times prior thereto, it was observed that a Milwaukee bench grinder had a measured 1/2" gap between the tongue guard and the abrasive wheel and a U.S. Electrical floor mounted, double wheeled grinder had no tongue guards on either side.
Recent events (2)
  • — I (S) $1650
  • — Z (S) $3000

1917.151 G04

Serious Gravity 5 2 instances 4 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1917.151(g)(4): Work rests on fixed grinding machines were not adjusted closely to the wheel with a maximum opening of 1/8-inch (3.18 mm) and securely clamped.   a.  Terminal, High Lift Maintenance - Noted on or about 8/2/13 and at times prior thereto, it was observed that the workrests of a double wheeled Milwaukee bench grinder had a measured 1/2" gap between the work rests and the abrasive wheels on both sides.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1918.105 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3750.00 · Current $2063.00 Reduced
29 CFR 1918.105(b)(1): The employer did not provide personal flotation devices (PFDs) for each employee engaged in work in which the employee might have fallen into the water.   a.  Pier 39, Cargo/Barge Operations - Noted on or about 8/2/13 and at times prior thereto, an employee was observed from the terminal yard climbing over a barge railing that was actively being loaded thereby exposing him to to a fall distance of approximately 10 feet into the water below which is 35 feet deep.   Other employees were observed working nearby the employee on the barge deck and the nearest throw ring is located on the barge approximately 150 feet away.
Recent events (2)
  • — I (S) $2062.5
  • — Z (S) $3750

1910.305 G01 IV A

Other-than-serious 2 instances 10 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:   a.  Terminal, High Lift Maintenance and Chassis Maintenance - Noted on or about 8/2/13 and at times prior thereto, flexible cords were used to energize employee refrigerators instead of appropriate wall outlets.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View YOUNG BROTHERS, LIMITED's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339247645.