Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: ZASTROW CONSTRUCTION, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ZASTROW CONSTRUCTION, LLC in NW CORNER OF HIGHWAYS PF AND W, NORTH FREEDOM, WI 53951 (NAICS 238160). OSHA activity number 339450967.

Watch Zastrow Construction, LLC — free Get an email when a new federal OSHA severe-injury report for Zastrow Construction, LLC is published. One employer, no account, unsubscribe in one click.
Site address
NW CORNER OF HIGHWAYS PF AND W
City
NORTH FREEDOM
State
WI
ZIP
53951
Mailing
E8469 KOCH RD, NORTH FREEDOM, WI 53951
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
3
Ownership type
A

7 citations on file for this inspection.

1903.19 D01

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $400.00 · Current $400.00
29 CFR 1903.19(d)(1): The employer must submit to the Agency, along with the information on abatement certification required by paragraph (c)(3) of this section, documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.  The employer failed to provide documentation of the correction of the hazards created by the fact that the Catepillar TH63 Telehandler was not constructed in accordance with the design of a qualified person:  a. The platform floor did not have a slip-resistant surface;  b. The floor dimensions of the platform had a width greater than the overall width of the forklift;  c. The maximum working load, including personnel and equipment, was not posted on the platform;  d. There was no means to securely attach the platform to the lifting mechanism, and to prevent the platform from inadvertent pivoting.
Recent events (1)
  • — Z (O) $400

1926.451 A06

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1600.00 Reduced
29 CFR 1926.451(a)(6): Scaffolds were not constructed in accordance with the design of a qualified person:    On or about October 30, 2013, the scaffold platform used with the Catepillar TH63 Telehandler (Serial No. 5WM02371) was not constructed in accordance with the design of a qualified person in that:    a) The platform floor did not have a slip-resistant surface;    b) The floor dimensions of the platform had a width greater than the overall width of the forktruck;    c) The maximum working load including personnel and equipment was not posted on the platform;    d) There was no means to securely attach the platform to the lifting mechanism, and to prevent the platform from in-advertent pivoting;
Recent events (2)
  • — I (S) $1600
  • — Z (S) $2800

1926.451 C02 V

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $0.00 Reduced
29 CFR 1926.451(c)(2)(v): Fork-lifts were used to support scaffold platforms while the entire platform was not attached to the forks:    On or about October 30, 2013, the Caterpillar model TH63 Telehandler forklift (Serial No. 5WM02371) was used to support the scaffold platform while the platform was not attached to the forks.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2000

1926.454 A01

Serious Gravity 10 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $0.00 Reduced
29 CFR 1926.454(a)(1): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards including the nature of fall hazards in the work area:    On or about October 30, 2013, employee(s) had not received training on fall hazards involving scaffold use.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

1926.451 G01

Serious Gravity 10 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1600.00 Reduced
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1 m) above a lower level was not protected from falling to that lower level:    On or about October 30, 2013, employee(s) working at a height greater than 10 feet (3.1 m) above the ground were not protected from falling to that lower level while working on the scaffold platform on the Caterpillar forklilft (Serial No. 5WM02371).
Recent events (2)
  • — I (S) $1600
  • — Z (S) $2800

1926.501 B11

Serious Gravity 10 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1600.00 Reduced
29 CFR 1926.501(b)(11): Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems:    On or about October 30, 2013, employee(s) were engaged in the installation of roofing materials on a steep roof with eave height of greater than 6 feet (1.8 m) without fall protection.
Recent events (2)
  • — I (S) $1600
  • — Z (S) $2800

1926.503 A01

Serious Gravity 10 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $0.00 Reduced
29 CFR 1926.503(a)(1):  The employer did not provide a training program for each employee who was exposed to fall hazards:    On or about October 18, 2013, employees who were exposed to fall hazards were not trained in fall protection procedures to recognize and minimize those hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339450967.