OSHA Inspection: LANE MYERS COMPANY INC

Issued

2014-04-16 00:00:00

Abate by

2014-07-19 00:00:00

Penalty

Initial $1600.00 · Current $1120.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):    Employees engaged in manufacturing activities using the following pieces of equipment in the production facility were exposed to caught-between hazards in that point of operation guarding was not provided:    a)  The Small High Chair Machine, pneumatic press    b)  The Large High Chair Machine, pneumatic press

Issued

2014-04-16 00:00:00

Abate by

2014-06-19 00:00:00

Penalty

Initial $1200.00 · Current $840.00 Reduced

General-duty citation text

29 CFR 1910.215(d)(3): The contact surface(s) of wheel(s), blotter(s) or flange(s) on grinding machine(s) were not flat and free or foreign matter:  Employees engaged manufacturing activities using the pedestal grinder at the south side of the production facility near the overhead door were exposed to struck-by hazards in that the edges of the grinding wheel were worn and rounded.

Issued

2014-04-16 00:00:00

Abate by

2014-06-19 00:00:00

Penalty

Initial $1200.00 · Current $840.00 Reduced

General-duty citation text

29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points.  Employees engaged in manufacturing activities at the Small High Chair in the production facility were exposed to fire hazards in that the exit rout from the working area to the nearest point of exit was found to be less than 28 inches.

Issued

2014-04-16 00:00:00

Abate by

2014-06-19 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly:  The fire extinguishers throughout the facility were not visually inspected at least monthly.