OSHA Inspection: CHER-AE HEIGHTS CASINO

Issued

2014-06-10 00:00:00

Penalty

Initial $2100.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit":     Shop: On or about May 6, 2014 and at times prior thereto, there was no exit sign leading to the designated egress.

Issued

2014-06-10 00:00:00

Abate by

2014-06-27 00:00:00

Penalty

Initial $2800.00 · Current $2100.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:     Shop: On or about May 6, 2014 and at times prior thereto, the Ryobi 6 inch   1/2  HP benchgrinder, Model BG60D s/n 102000, measured one and one-eighth inch at the work rest.  It did not have the work rest adjusted to one-eight inch to the wheel.

Issued

2014-06-10 00:00:00

Abate by

2014-06-27 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:   Shop: On or about May 6, 2014 and at times prior thereto, the Ryobi 6 inch ½ HP benchgrinder, Model BG60D s/n 102000  measured 1 ½ inches at the tongue guard. It did not have the tongue guard adjusted to one-quarter inch to the wheel.

Issued

2014-06-10 00:00:00

Penalty

Initial $2800.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:    Shop: On or about May 6, 2014 and at times prior thereto, the electrical panel switches and transformer shutoff switches were blocked by equipment and stored material preventing direct access and clearance for working around electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation.

Issued

2014-06-10 00:00:00

Abate by

2014-06-27 00:00:00

Penalty

Initial $2800.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective:      Shop: On or about May 6, 2014 and at times prior thereto, there was a missing electrical grounding pin on the electrical cord to power the portable compressor.

Issued

2014-06-10 00:00:00

Abate by

2014-06-27 00:00:00

Penalty

Initial $3500.00 · Current $3500.00

General-duty citation text

29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:  High Voltage Room: On or about May 6, 2014 and at times prior thereto, there were two openings on the GE Panelboard # GF972758 used to provide power for the compressor, and trailer generator charger exposing maintenance employees to electrical hazards.