Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

GLENNVILLE, GA —

OSHA Inspection: ROTARY CORPORATION, INC.

Referral inspection · Safety discipline

At a glance

On , OSHA opened a referral safety inspection of ROTARY CORPORATION, INC. in 799 W. BARNARD STREET, GLENNVILLE, GA 30427 (NAICS 332999). OSHA activity number 339942732.

Watch Rotary Corporation, INC. — free Get an email when a new federal OSHA severe-injury report for Rotary Corporation, INC. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
ROTARY CORPORATION, INC.
Site address
799 W. BARNARD STREET
City
GLENNVILLE
State
GA
ZIP
30427
Mailing
P.O. BOX 747, GLENNVILLE, GA 30427

What kind of inspection was it?

Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
332999
Employees
100
Ownership type
A

Citations

5 citations on file for this inspection.

1910.217 B07 III

Serious Gravity 5 1 instance 7 exposed
Issued
Abate by
Penalty
Initial $5500.00 · Current $5000.00 Reduced

General-duty citation text

29 CFR 1910.217(b)(7)(iii): Fixing of the selection of either the single stroke or continuous function was not by means capable of supervision by the employer:    a) Press Areas Throughout the Facility - On or about July 14, 2014 and times prior to, employees were capable of selecting either the single stroke or continuous mode on the mechanical power presses without supervision by the employer, exposing employees to amputation hazards at the point of operation.
Recent events (2)
  • — I (S) $5000
  • — Z (S) $5500

1910.217 B13

Deleted Serious Gravity 10 1 instance 7 exposed
Issued
Abate by
Penalty
Initial $7000.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.217(b)(13): Control system(s) of mechanical power press(es) were not constructed so that a failure within the system would not prevent the normal stopping action from being applied to the press when required, but would prevent initiation of a successive stroke until the failure was corrected:  a) Forming Department - At the time of the amputation incident on or about July 14, 2014 and times prior to, one or more of the control system elements on press #206 were not constructed such that a failure within the system would not prevent the normal stopping action from being applied to the press when required, but would prevent initiation of a successive stroke until the failure was corrected, thus exposing employees to amputation hazards at the point of operation.
Recent events (2)
  • — I (S) $0
  • — Z (S) $7000

1910.217 E01 I A

Serious Gravity 10 1 instance 7 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $5000.00

General-duty citation text

29 CFR 1910.217(e)(1)(i)(A): Periodic and regular inspections of each power press were not conducted to ensure that all of its parts, auxiliary equipment, and safeguards, including clutch/brake mechanism, antirepeat feature, and single-stroke mechanism, are in safe operating condition and adjustment:    a) Forming Department - At the time of the amputation incident  on or about July 14, 2014 and times prior to, the employer did not ensure that all of the safeguards on Press #206 including but not limited to the brake monitor and the anti-repeat feature were in a safe operating condition and adjustment by having them inspected regularly, thus exposing employees to amputation hazards at the point of operation.
Recent events (2)
  • — I (S) $5000
  • — Z (S) $0

1910.217 C03 VII D

Deleted Serious Gravity 5 1 instance 7 exposed
Issued
Abate by
Penalty
Initial $5500.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.217(c)(3)(vii)(d): Two hand controls used with mechanical power press(es) were not fixed in position so that only a supervisor or safety engineer was capable of relocating the controls:  a) Forming Department - On or about July 14, 2014 and times prior to, the two-hand controls were not fixed in position so that only the supervisor or a safety engineer was capable of relocating them, exposing employees to an amputation hazard at the point of operation.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5500

1910.217 F02

Serious Gravity 10 1 instance 7 exposed
Issued
Abate by
Penalty
Initial $7000.00 · Current $5000.00 Reduced

General-duty citation text

29 CFR 1910.217(f)(2): Operator(s) were not trained and instructed in the safe method of work before starting work on mechanical power press(es):    a) Press Areas Throughout the Facility - On or about July 14, 2014 and at times prior to, the employer did not ensure that the operators were adequately trained in the safe work methods, exposing employees to an amputation hazard at the point of operation.
Recent events (2)
  • — I (S) $5000
  • — Z (S) $7000

More inspections at ROTARY CORPORATION, INC.

View ROTARY CORPORATION, INC.'s full OSHA safety record →

More inspections in this industry (NAICS 332999)

More inspections in GA

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339942732.