OSHA Inspection: FULLEN DOCK & WAREHOUSE

Issued

2015-03-17 00:00:00

Abate by

2015-04-17 00:00:00

Penalty

Initial $2100.00 · Current $1300.00 Reduced

General-duty citation text

29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition.    a) Maintenance Shop - On or about 2/24/15, employees were exposed slip and trip hazards when the shop was not kept clean and orderly.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2015-03-17 00:00:00

Abate by

2015-04-10 00:00:00

Penalty

Initial $2800.00 · Current $1500.00 Reduced

General-duty citation text

29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least    (a) Dock #3 - On or about 2/24/15, employees were exposed to explosion hazards when oxygen and acetylene cylinders were not separated as required.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2015-03-17 00:00:00

Abate by

2015-04-10 00:00:00

Penalty

Initial $2800.00 · Current $1500.00 Reduced

General-duty citation text

29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:    (a) Maintenance Shop - On or about 2/24/15, employees were exposed to electrical hazards when breaker blank filler plates were not installed in unused openings in the electrical panels.        In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2015-03-17 00:00:00

Abate by

2015-04-10 00:00:00

Penalty

Initial $3500.00 · Current $2275.00 Reduced

General-duty citation text

29 CFR 1918.66(b)(2): Accessible areas within the swing radius of the body of a revolving crane were not physically guarded during operations to prevent employees from being caught between the body of the crane and any fixed structure or between parts of the crane.    a) Dock #3 - On or about2/24/15, employees were exposed to struck-by hazards when the swing radius on the Link Belt crane was not guarded.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2015-03-17 00:00:00

Abate by

2015-04-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:   (a) Maintenance Shop - On or about 2/24/15, each breaker in the electrical panels had not been labeled indicating the purpose.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2015-03-17 00:00:00

Abate by

2015-04-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws:  (a) Maintenance Shop - On or about 2/24/15,   strain relief was not provided on an extension cord.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2015-03-17 00:00:00

Abate by

2015-04-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1915.55(a)(1): Valve protection caps on gas Welding and cutting cylinders were not in place or secure.  a) Dock #3 - On or about 2/24/15, valve caps were not in place on oxygen and acetylene cylinders.  b) Maintenance Shop - On or about 2/24/15, valve caps were not in place on oxygen cylinders.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2015-03-17 00:00:00

Abate by

2015-04-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1918.97(d)(2): Stretchers were not kept close to vessels and were not positioned to avoid damage to the stretcher.  a) Docks - On or about 2/24/15, the stretcher was not kept close to the vessels being worked.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2015-03-17 00:00:00

Abate by

2015-04-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1918.97(e)(1): The employer did not ensure that there was in the vicinity of each vessel being worked, at least one U.S. Coast Guard approved 30-inch life-ring with no less than 90 feet of line attached.  a) Dock #1 - On or about 2/24/15, 90 feet of rope was not attached to the life rings.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).