OSHA Inspection: MCNALLY ENTERPRISES, LLC.

Issued

2015-04-27 00:00:00

Abate by

2015-05-01 00:00:00

Penalty

Initial $1600.00 · Current $1200.00 Reduced

General-duty citation text

29 CFR 1926.304(f):  Woodworking machinery did not meet applicable requirements per American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f):   (a) Garage - on or about April 22, 2015 - DeWalt DW745 10" portable table saw, serial# 201228-CT164145 was not equipped with a magnetic anti-restart switch.  Section 3.1.3(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f):  On applications where injury to the operator might result if motors were to restart after power failures, provisions shall be made to prevent machines from automatically restarting upon restoration of power.  (b) Garage - on or about April 22, 2015 - DeWalt DW745 10" portable table saw, serial# 201228-CT164145 was not equipped with a material spreader.  Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f):  Each hand-fed circular rip saw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator.  (c) Garage -  on or about April 22, 2015 - DeWalt DW745 10" portable table saw, serial# 201228-CT164145 was not equipped with anti-kickback fingers or dogs.  Section 4.1.2(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f):  Each hand-fed circular rip saw shall be furnished with anti-kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or throw it back toward the operator.

Issued

2015-04-27 00:00:00

Abate by

2015-05-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.304(i)(1):  Each circular hand-fed rip saw was not guarded by a hood which completely enclosed that portion of the saw blade above the table and that portion of the saw above the material being cut:  (a) Garage - on or about April 22, 2015 - DeWalt DW745 10" portable table saw, serial# 201228-CT164145 was not equipped with a hood guard.