Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: LAKEVIEW MEMORIAL PARK

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of LAKEVIEW MEMORIAL PARK in 1300 US-130, CINNAMINSON, NJ 08077 (NAICS 812220). OSHA activity number 341439164.

Watch Lakeview Memorial Park — free Get an email when a new federal OSHA severe-injury report for Lakeview Memorial Park is published. One employer, no account, unsubscribe in one click.
Site address
1300 US-130
City
CINNAMINSON
State
NJ
ZIP
08077
Mailing
1300 US-130, CINNAMINSON, NJ 08077
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
812220
Employees
5
Ownership type
A

8 citations on file for this inspection.

1910.106 B06

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.106(b)(6): In locations where flammable vapors may be present, precautions were not taken to prevent ignition by eliminating or controlling sources of ignition.  Sources of ingition may include open flames, lightning, smoking, hot sirfaces, frictional heat, sparks (static, electrical, and mechanical), spontaneous ignition, chemical and physical-chemical reactions, and radiant heat:  a) Commercial facility at 1300 US 130 in Cinnaminson, NJ, 08077- Maintenance shop: Employees used portable heaters with open hot flame/heating elements in the vicinity of gasoline cans which were stored inside the maintenance shop, observed on or about 1/20/16.   NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $0

1910.215 A02

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections:  a) Commercial facility at 1300 US 130 in Cinnaminson, NJ, 08077- Maintenance shop: Employees used a Baldor bench grinder with tools and equipment which was no completely guarded, observed on or about 1/20/16.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $0

1910.305 A02 I

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(a)(2)(i): Temporary electrical power and lighting installations rated 600 volts, nominal, or less were used for purposes other than those permitted in subparagraphs (A), (B) and (C) of this paragraph:  a) Commercial facility at 1300 US 130 in Cinnaminson, NJ, 08077- Maintenance shop: Employees used temporary wiring to power various equipment in the shop and was used to power security and other utility systems, observed on or about 1/20/16.   NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $0

1910.305 A02 IX

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(a)(2)(ix): All lamps for general illumination were not protected from accidental contact or breakage by a suitable fixture or lampholder with a guard. Brass shell, paper-lined sockets, or other metal-cased sockets may not be used unless the shell is grounded.  a) Commercial facility at 1300 US 130 in Cinnaminson, NJ, 08077- Maintenance shop: Employees worked with equipment where general lighting installations did not have covers to prevent accidental contact, observed on or about 1/20/16.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $0

1910.305 B02 I

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and outlet boxes in completed installations did not have a cover, faceplate, or fixture canopy:  a) Commercial facility at 1300 US 130 in Cinnaminson, NJ, 08077- Maintenance shop: Employees used switches and worked in the immediate vicinity of junction boxes which did not have covers or faceplates, observed on or about 1/20/16.   NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $0

1910.334 A02 II

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service:  a) Commercial facility at 1300 US 130 in Cinnaminson, NJ, 08077- Maintenance shop: Employees used an extension cord to power various equipment including but not limited to heaters which was damaged in that the conductors were exposed, observed on or about 1/20/16.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $0

1926.601 B14

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.601(b)(14): All vehicles in use were not checked at the beginning of each shift to assure that the following parts, equipment, and accessories were in safe operating condition and free of apparent damage which could cause failure while in use: service brakes, including trailer brake connections; parking system (hand brake); emergency stopping system (brakes); tires; horn; steering mechanism; coupling devices; seat belts; operating controls; and safety devices.  a) Commercial facility at 1300 US 130 in Cinnaminson, NJ, 08077- Maintenance shop: Employees worked with a Case 580M backhoe to excavate and handle materials including but not limited to vaults and coffins where a safety outrigger would not engage due to hydraulic system component failure, observed on or about 1/20/16.  NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $0

1926.602 A09 II

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.602(a)(9)(ii): Earth moving or compacting equipment which had an obstructed view to the rear was operated in reverse gear; such equipment did not have in operation a reverse signal alarm distinguishable from the surrounding noise level or did an employee signalled that it is safe to do so.  a) Commercial facility at 1300 US 130 in Cinnaminson, NJ, 08077- Maintenance shop: Employees used a case 580M backhoe with an intermittent reverse signal alarm to dig excavations and handle materials such as but not limited to vaults and coffins, observed on or about 1/20/16.   NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341439164.