OSHA Inspection: ZUNIGA CONSTRUCTION INC.

Issued

2016-11-18 00:00:00

Abate by

2016-12-22 00:00:00

Penalty

Initial $300.00 · Current $300.00

General-duty citation text

29 CFR 1903.19(c)(1):  The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:    Zuniga Construction Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:    Citation Number                       Item Number                            Abatement Date  01                                            01                                            08/08/2016 01                                            02                                            08/08/2016 01                                            03                                            08/22/2016 01                                            04                                            08/08/2016    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2016-07-27 00:00:00

Abate by

2016-08-08 00:00:00

Penalty

Initial $2800.00 · Current $1485.00 Reduced

General-duty citation text

29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii):    a) On June 27, 2016, employees were exposed to the hazard of falling up to approximately 14 feet from fabricated frame scaffold platforms which were not fully planked.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2016-07-27 00:00:00

Abate by

2016-08-08 00:00:00

Penalty

Initial $2000.00 · Current $1045.00 Reduced

General-duty citation text

29 CFR 1926.451(e)(1): Safe access was not provided to scaffold platforms when the platforms were more than 2 feet above or below the point of access:    a) On June 27, 2016, employees accessed fabricated frame scaffold platforms up to approximately 14 feet above the ground by climbing the cross bracing and the end frames.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2016-07-27 00:00:00

Abate by

2016-08-22 00:00:00

Penalty

Initial $2800.00 · Current $1485.00 Reduced

General-duty citation text

29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration:    a) On or about June 23, 2016, the employer did not ensure that the fabricated frame scaffold provided for employee use at the site was erected, moved, dismantled or altered under the direction and supervision of a competent person qualified in scaffolding erection, moving, dismantling, and alteration.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2016-07-27 00:00:00

Abate by

2016-08-08 00:00:00

Penalty

Initial $2800.00 · Current $1485.00 Reduced

General-duty citation text

29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level:    a) On June 27, 2016, employees were exposed to the hazard of falling up to approximately 14 feet while performing masonry work from fabricated frame scaffold platforms without guardrails along open sides and ends.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.