Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: L.M. VELAZQUEZ ZUNIGA FRAMING

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of L.M. VELAZQUEZ ZUNIGA FRAMING in 1927 ESTIN CROSSING, SAN ANTONIO, TX 78260 (NAICS 238130). OSHA activity number 342041506.

Watch L.M. Velazquez Zuniga Framing — free Get an email when a new federal OSHA severe-injury report for L.M. Velazquez Zuniga Framing is published. One employer, no account, unsubscribe in one click.
Site address
1927 ESTIN CROSSING
City
SAN ANTONIO
State
TX
ZIP
78260
Mailing
P.O. BOX 362, VON ORMY, TX 78073
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

6 citations on file for this inspection.

1926.100 A

Serious Gravity 1 1 instance 3 exposed
Issued
Penalty
Initial $1630.00 · Current $1630.00
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:  Throughout construction site: On or about January 20, 2017, employees not wearing protective helmets were exposed to struck-by hazard when other employees were working above them using pneumatic nail guns, while installing the rafters to the residential home.
Recent events (1)
  • — Z (S) $1630

1926.304 D

Serious Gravity 5 1 instance 4 exposed
Issued
Penalty
Initial $2173.00 · Current $2173.00
29 CFR 1926.304(d): Each portable, power-driven circular saw withdrawn from the work did not automatically and instantly return the lower guard to the covering position of the saw:  Exterior front residential home: On or about January 20, 2017, employees were exposed to amputations hazards, when using a DeWalt circular saw, while cutting the roof rafters for the framing.
Recent events (1)
  • — Z (S) $2173

1926.451 A06

Serious Gravity 5 1 instance 4 exposed
Issued
Penalty
Initial $2716.00 · Current $2716.00
29 CFR 1926.451(a)(6): Scaffolds were not designed by a qualified person:  Interior second floor: On or about January 20, 2017, employees with no fall protection were exposed to falls, when working from a scaffold platform, while installing the roof rafters to the framing.
Recent events (1)
  • — Z (S) $2716

1926.451 B01

Serious Gravity 5 1 instance 4 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(b)(1): Platform(s) on all working levels of scaffolds, were not fully planked or decked between the front uprights and guardrail supports such that the space between adjacent units, and the space between the platform and the uprights is no more than 1 inch (2.5 cm) wide:  Interior above 2nd floor: On or about January 20, 2017, employees with no fall protection were exposed to falls, when working from a scaffold platform, while installing the roof rafters framing.
Recent events (1)
  • — Z (S) $0

1926.451 G04 I

Serious Gravity 5 1 instance 4 exposed
Issued
Penalty
Initial $2716.00 · Current $2716.00
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms:  Interior above 2nd floor: On or about January 20, 2017, employees with no fall protection were exposed to falls, when working from a make-shift scaffold platform, while installing the roof rafters to the framing.
Recent events (1)
  • — Z (S) $2716

1926.501 B13

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $2173.00 · Current $2173.00
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):  Front side residential home: On or about January 20, 2017, employees with no fall protection were exposed to fall hazards, when working from the top plates and rafters of the residential home, while installing the roof rafters.
Recent events (1)
  • — Z (S) $2173

RNWBL

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342041506.