HOUSTON, TX —
OSHA Inspection: MICRO PRECISION OF TEXAS INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MICRO PRECISION OF TEXAS INC in 4413 CAMPBELL STREET, HOUSTON, TX 77041 (NAICS 332710). OSHA activity number 342229507.
Where did this inspection happen?
- Establishment
- MICRO PRECISION OF TEXAS INC
- Site address
- 4413 CAMPBELL STREET
- City
- HOUSTON
- State
- TX
- ZIP
- 77041
- Mailing
- 4413 CAMPBELL STREET, HOUSTON, TX 77041
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 10
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.219 D01
- Issued
- Abate by
- Penalty
- Initial $2309.00 · Current $1385.00 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): On or about April 6, 2017 a) In the milling area where employees were exposed to a caught-by hazard while operating a Clausing Mill (Mill #1, model 8530, serial number 010410) without a guard covering the pulley on the motor assembly. b) In the milling area where employees were exposed to a caught-by hazard while operating a Clausing Mill (Mill #2, model 8530, serial number missing) without a guard covering the pulley on the motor assembly. c) In the milling area where employees were exposed to a caught-by hazard while operating a Clausing Mill (Mill #3, model 8530, serial number missing) without a guard covering the pulley on the motor assembly.
Recent events (2)
- — I (S) $1385.4
- — Z (S) $2309
1910.219 E02 I
- Issued
- Abate by
- Penalty
- Initial $2309.00 · Current $1385.00 Reduced
General-duty citation text
29 CFR 1910.219(e)(2)(i): Overhead horizontal belt(s) with lower parts seven -7 feet or less from the floor(s) or platform(s) were not guarded on the sides and bottom in accordance with the requirements specified at CFR 1910.219(o)(3)(a). On or about April 6, 2017 a) In the milling area where employees were exposed to a caught-by hazard while operating a Clausing Mill (Mill #1, model 8530, serial number 010410) without a guard covering the overhead horizontal belt on the motor assembly located 7 feet or less from the floor. b) In the milling area where employees were exposed to a caught-by hazard while operating a Clausing Mill (Mill #2, model 8530, serial number missing) without a guard covering the overhead horizontal belt on the motor assembly located 7 feet or less from the floor. . c) In the milling area where employees were exposed to a caught-by hazard while operating a Clausing Mill (Mill #3, model 8530, serial number missing) without a guard covering the overhead horizontal belt on the motor assembly located 7 feet or less from the floor.
Recent events (2)
- — I (S) $1385.4
- — Z (S) $2309
More inspections in this industry (NAICS 332710)
HUDSON, NH—2026-07-16 00:00:00
OMNI COMPONENTS CORP.
CAMBRIDGE, MN—2026-07-16 00:00:00
111613 - FOX ENGINEERING LLC
WIXOM, MI—2026-07-16 00:00:00
MANSON MANUFACTURING LLC DBA TOMCO MANUFACTURING
CLAWSON, MI—2026-07-16 00:00:00
FOUR WAY INDUSTRIES INC
CLAWSON, MI—2026-07-16 00:00:00
FOUR WAY INDUSTRIES INC
More inspections in TX
RICHMOND, TX—2026-07-17 00:00:00
CORNELIUS NURSERIES, INC.
HOUSTON, TX—2026-07-17 00:00:00
HOLLOWAY HOUSTON, INC.
BONHAM, TX—2026-07-17 00:00:00
VOLUNTARY PURCHASING GROUPS, INC.
SNYDER, TX—2026-07-16 00:00:00
RNWBL
WICHITA FALLS, TX—2026-07-16 00:00:00
UNITED RENTALS, INC.
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342229507.