Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: BLACK HORSE AUTOMOTIVE SERVICES, INC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of BLACK HORSE AUTOMOTIVE SERVICES, INC in 726 UNION AVENUE, BRIDGEPORT, CT 06607 (NAICS 811121). OSHA activity number 342374246.

Watch Black Horse Automotive Services, INC — free Get an email when a new federal OSHA severe-injury report for Black Horse Automotive Services, INC is published. One employer, no account, unsubscribe in one click.
Site address
726 UNION AVENUE
City
BRIDGEPORT
State
CT
ZIP
06607
Mailing
726 UNION AVENUE, BRIDGEPORT, CT 06607
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811121
Employees
12
Ownership type
A

3 citations on file for this inspection.

1910.134 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2897.00 · Current $1449.00 Reduced
29 CFR 1910.134(e)(1): General. The employer shall provide a medical evaluation to determine the employee's ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace. The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator.    WORKSHOP:  The employees, required to wear the half face piece cartridge respirators and filtering facepieces during the tasks, such as (but not limited to) spray painting and body work  had not been medically evaluated for their ability prior to the employee wearing the respirator.
Recent events (2)
  • — I (S) $1448.5
  • — Z (S) $2897

1910.134 F02

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(f)(2): The employer shall ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter.  WORKSHOP:  The employee, required to wear the half face piece cartridge respirators during the tasks, such as (but not limited to) spray painting had not been fit tested prior to initial wear.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 K01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2897.00 · Current $1449.00 Reduced
29 CFR 1910.134(k)(1): The employer did not provide respirator training that ensured that each employee could demonstrate knowledge of at least the following elements: Why the respirator is necessary and how improper fit, usage, or maintenance can compromise the protective effect of the respirator; What the limitations and capabilities of the respirator are; How to use the respirator effectively in emergency situations, including situations in which the respirator malfunctions; How to inspect, put on and remove, use, and check the seals of the respirator; What the procedures are for maintenance and storage of the respirator, and How to recognize medical signs and symptoms that may limit or prevent the effective use of respirators:    WORKSHOP:  The employer had not provided training and information for the employee who was required to wear half face piece cartridge respirators and dust/filtering face piece during the tasks, such as (but not limited to) spray painting and body shop work.
Recent events (2)
  • — I (S) $1448.5
  • — Z (S) $2897

View BLACK HORSE AUTOMOTIVE SERVICES, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342374246.