Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: X W CONSTRUCTION II LIMITED LIABILITY PARTNERSHIP

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of X W CONSTRUCTION II LIMITED LIABILITY PARTNERSHIP in 3000 S.R. 405, MILTON, PA 17847 (NAICS 238160). OSHA activity number 342915782.

Watch X W Construction II Limited Liability Partnership — free Get an email when a new federal OSHA severe-injury report for X W Construction II Limited Liability Partnership is published. One employer, no account, unsubscribe in one click.
Site address
3000 S.R. 405
City
MILTON
State
PA
ZIP
17847
Mailing
5745 MUSSER LANE, WATSONTOWN, PA 17777
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
4
Ownership type
A

4 citations on file for this inspection.

1926.416 A01

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $3049.00 · Current $2000.00 Reduced
29 CFR 1926.416(a)(1): Employees were permitted to work in proximity to electric power circuits and were not protected against electric shock by de-energizing and grounding the circuits or effectively guarding the circuits by insulation or other means.    a) Roof, 3000 S.R. 405, Milton, PA - Employees on the commercial building roof worked and walked under the energized and uninsulated electrical power supply line (240V) that was held aloft by a wooden tripod and were exposed to a contact with an electrical current hazard, as observed on or about January 31, 2018.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $3049

1926.501 B10

Repeat Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $8536.00 · Current $6000.00 Reduced
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.  Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system.    a) Roof, 3000 S.R. 405, Milton, PA - Employees installed metal roofing on a low sloped commercial roof without any fall protection and were exposed to a fall hazard between eight (8) foot from the roof edge to fifteen (15) foot from the roof peak (rake side) onto concrete or asphalt, as observed on or about January 31, 2018.    In accordance with 29 CFR 1903.19, abatement certification and documentation is required for this violation.    X W Construction II Limited Liability Partnership a successor of XW Construction, Limited Liability Company was previously cited for a violation of this occupational safety and health standard or its equivalent standard, which was contained in OSHA inspection number 977805, citation number 1, item number 2 and was affirmed as a final order on June 20, 2014, with respect to a workplace located at 1043 East Third Street, Nescopeck, PA.
Recent events (2)
  • — I (R) $6000
  • — Z (R) $8536

1926.100 A

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns.  a) Ground Level, 3000 S.R. 405, Milton, PA - The employee working on the ground and providing metal roof panels to an employee working on the roof was not wearing a protective helmet exposing the ground employee to head injuries in the event that tools or material fell, as observed on or about January 31, 2018.  In accordance with 29 CFR 1903.19, abatement certification is required for this violation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1926.102 A01

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents.  a) Roof, 3000 S.R. 405, Milton, PA - An employee was not wearing eye protection while using a nail gun to attach wood to the roof and was exposed to potential eye injuries, as observed on or about January 31, 2018.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342915782.