Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BIG LAKE GAS PLANT, LP

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of BIG LAKE GAS PLANT, LP in 189 GAS PLANT ROAD, BIG LAKE, TX 76932 (NAICS 211111). OSHA activity number 343334702.

Watch BIG Lake GAS Plant, LP — free Get an email when a new federal OSHA severe-injury report for BIG Lake GAS Plant, LP is published. One employer, no account, unsubscribe in one click.
Site address
189 GAS PLANT ROAD
City
BIG LAKE
State
TX
ZIP
76932
Mailing
P.O. BOX 16, BARNHART, TX 76930
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
211111
Employees
16
Ownership type
A

5 citations on file for this inspection.

1910.119 E03 V

Serious Gravity 10 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $5304.00 · Current $5304.00
29 CFR 1910.119(e)(3)(v): The process hazard analysis did not address the hazards related to facility siting:     On or about July 26, 2018, at Big Lake Gas Plant, LP located in Big Lake, Texas, employer did not address facility siting in the Process Hazard Analysis (PHA).
Recent events (2)
  • — I (S) $5304
  • — Z (S) $5304

1910.119 E06

Serious Gravity 10 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $5304.00 · Current $5304.00
29 CFR 1910.119(e)(6): The process hazard analysis was not updated and revalidated every five years:    On or about July 26, 2018, at Big Lake Gas Plant, LP located in Big Lake, Texas, the employer had not updated and revalidated the process hazard analysis every five years as required. The last process hazard analysis was conducted in 1996.
Recent events (2)
  • — I (S) $5304
  • — Z (S) $5304

1910.119 F03

Serious Gravity 5 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $3031.00 · Current $3035.00
29 CFR 1910.119(f)(3): The operating procedures were not reviewed as often as necessary to assure that they reflect current operating practice, including changes that result from changes in process chemicals, technology, and equipment, and changes to facilities. The employer did not annually certify that operating procedures were current and accurate.     On or about July 26, 2018, at Big Lake Gas Plant, LP located in Big Lake, Texas, the employer did not annually certify operating procedures to ensure that they are current and accurate.  The operating procedures have not been certified since 2000 for operations that included, but not limited to the following:    a.  Initial startup  b.  Emergency shutdown,  c.  Normal shutdown,  d.  Loading and unloading  e.  Startup procedures following a turnaround or after emergency shutdown.
Recent events (2)
  • — I (S) $3035
  • — Z (S) $3031

1910.119 G01 I

Serious Gravity 5 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $3031.00 · Current $0.00 Reduced
29 CFR 1910.119(g)(1)(i): The employer did not train each employee involved in the operating process, in a overview of the process and in the operating procedures as specified in paragraph (f) of 29 CFR 1910.119:    On or about July 26, 2018 at Big Lake Gas Plant, LP located in Big Lake, Texas, the employer did not ensure employees engaged in the process operation are trained in the overview of the process and operating procedures including but not limited to the following:    a.  Initial startup  b.  Emergency shutdown,  c.  Normal shutdown,  d.  Loading and unloading  e.  Startup procedures following a turnaround or after emergency shutdown.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3031

1910.119 J02

Other-than-serious 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $5304.00 · Current $5304.00
29 CFR 1910.119(j)(2): The employer did not establish or implement written procedures to maintain the on-going integrity of process equipment:     On or about July 26, 2018 at Big Lake Gas Plant, LP located in Big Lake, Texas employer failed to establish and implement written mechanical integrity procedures for inspecting and testing the process piping system and for equipment including but not limited to the following:    a.  The Amine Reboiler,  b.  The Product Still Reboiler Pump,  c.  The Demethanizer Reboiler Furnance,  d.  Refrigerant Storage Tank (32-386)  e. Refrigerant Storage Tank (32-387)
Recent events (2)
  • — I (O) $5304
  • — Z (S) $5304

View BIG LAKE GAS PLANT, LP's full OSHA safety record →

RNWBL

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343334702.