Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ERNESTO MARTINEZ CASTILLO

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ERNESTO MARTINEZ CASTILLO in 5205 REGENCY POINT DRIVE, SUWANEE, GA 30024 (NAICS 238130). OSHA activity number 343375291.

Watch Ernesto Martinez Castillo — free Get an email when a new federal OSHA severe-injury report for Ernesto Martinez Castillo is published. One employer, no account, unsubscribe in one click.
Site address
5205 REGENCY POINT DRIVE
City
SUWANEE
State
GA
ZIP
30024
Mailing
2070 HOLLYWOOD DRIVE, LAWRENCEVILLE, GA 30044
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

4 citations on file for this inspection.

1926.100 A

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1663.00 · Current $998.00 Reduced
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  On or about August 8, 2018, at Lot 11, 5205 Regency Point Drive, Suwanee, Georgia:  Three employees performing framing work at ground level were exposed to struck-by hazards from falling tools and materials of the employees working above them when the employees working on the ground did not use hard hats.
Recent events (2)
  • — I (S) $997.8
  • — Z (S) $1663

1926.300 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2217.00 · Current $1330.00 Reduced
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use:  On or about August 8, 2018, at Lot 11, 5205 Regency Point Drive, Suwanee, Georgia:  An employee performing framing work was exposed to amputation hazards while operating a Makita 5007F circular saw with a piece of wood wedged in between the blade and blade guard that prevented the blade guard from actuating.
Recent events (2)
  • — I (S) $1330.2
  • — Z (S) $2217

1926.501 B13

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3880.00 · Current $2328.00 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):  On or about August 8, 2018, at Lot 11, 5205 Regency Point Drive, Suwanee, Georgia:  Two employees performing framing work were exposed to a fall hazard of approximately 16-feet when they worked from the top plate of a house without using fall protection.
Recent events (2)
  • — I (S) $2328
  • — Z (S) $3880

1926.1053 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3880.00 · Current $2328.00 Reduced
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  On or about August 8, 2018, at Lot11, 5205 Regency Point Drive, Suwanee, Georgia:  Two employees performing framing work were exposed to a fall hazard of approximately 16-feet when they used an aluminum extension ladder that was not set three feet above the landing.
Recent events (2)
  • — I (S) $2328
  • — Z (S) $3880

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343375291.