OSHA Inspection: GUERDON ENTERPRISES LLC

Issued

2018-12-17 00:00:00

Penalty

Initial $5089.00 · Current $2545.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):    (a) Mill Shop, on or about November 14, 2018; the Sub Assembly Saw did not have a complete guard.     Note: Abatement certification IS NOT required for this item.

Issued

2018-12-17 00:00:00

Penalty

Initial $14967.00 · Current $9000.00 Reduced

General-duty citation text

29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposes an employee to injury and the defective or damaged item was not removed from service:    (a) On or about November 14, 2018 and at times prior thereto; multiple extension cords that had been damaged were in use throughout the facility.     Note: Abatement certification IS NOT required for this item.    Guerdon Enterprises LLC was previously cited for a violation of this occupational safety and health standard which was contained in OSHA inspection number 1228739, citation number 1, item number 1 and was affirmed as a final order on July 7, 2017, with respect to a workplace located at 5556 S Federal Way, Boise, ID 83716.

Issued

2018-12-17 00:00:00

Abate by

2019-01-14 00:00:00

Penalty

Initial $299.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed:    (a) On November 16, 2018 and at times prior thereto; the employer did not ensure that inspections of the energy control procedure were conducted at least annually.     Note: Abatement certification and documentation ARE required for this item.     Guerdon Enterprises LLC was previously cited for a violation of this occupational safety and health standard which was contained in OSHA inspection number 957970, citation number 1, item number 1 and was affirmed as a final order on March 7, 2014, with respect to a workplace located at 5556 S Federal Way, Boise, ID 83716.

Issued

2018-12-17 00:00:00

Abate by

2019-01-14 00:00:00

Penalty

Initial $714.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.132(h)(1): The employer did not provide personnel protective equipment (PPE) at no cost to employees, except as provided by paragraphs(h)(2) through (h)(6) of this section:    (a) On November 16, 2018 and at times prior thereto, the employer did not provide safety glasses to employees who were required to wear them.     (b) On November 16, 2018 and at times prior thereto, the employer did not provide cut resistive gloves to employees who were required to wear them.      Note: Abatement certification IS required for this item.

Issued

2018-12-17 00:00:00

Abate by

2019-01-14 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees:    (a) On November 16, 2018 and at times prior thereto; the employer did not provide authorized employees (maintenance workers) with the training on the specific lock out procedures for the Giben Routing Table.  Also, the employer did not provide the affected employees (equipment operators) with awareness training of the existing lockout procedures and what to do if the Giben Routing Table machine is locked out by an authorized employee.     Note: Abatement certification IS required for this item.