2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17
Safety Incidents OSHA Severe Injury Reports · 2015–2025

CAMDEN, NJ —

OSHA Inspection: HOLTEC INTERNATIONAL

Referral inspection · Health discipline

At a glance

On , OSHA opened a referral health inspection of HOLTEC INTERNATIONAL in 1 HOLTEC BOULEVARD, CAMDEN, NJ 08104 (NAICS 332420). OSHA activity number 343609053.

Watch Holtec International — free Get an email when a new federal OSHA severe-injury report for Holtec International is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
HOLTEC INTERNATIONAL
Site address
1 HOLTEC BOULEVARD
City
CAMDEN
State
NJ
ZIP
08104
Mailing
1 HOLTEC BOULEVARD, CAMDEN, NJ 08104

What kind of inspection was it?

Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
332420
Employees
400
Ownership type
A

Citations

3 citations on file for this inspection.

1910.244 A01 I

Other-than-serious 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $13260.00 · Current $13260.00

General-duty citation text

29 CFR 1910.244(a)(1)(i): The operator did not ensure that the jack used had a rating sufficient to lift and sustain the load:    a) Manufacturing Area, Bay 5, Paint and Blast Area: The operator did not ensure that the jack had a rating sufficient to lift and sustain the HI-STORM inner shell, on or about 10/25/19.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
  • — J (O) $13260
  • — C (S) $13260
  • — Z (S) $13260

1910.244 A01 II

Deleted Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.244(a)(1)(ii): The rated load was not legibly and permanently marked in a prominent location on the jack by casting, stamping, or other suitable means.  a) Manufacturing Area, Bay 5, Paint and Blast Area: The jack used to correct dimensions on a HI-STORM inner shell, was not marked to display the rated load, on or about 11/6/18.  NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
  • — J (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.244 A02 I

Other-than-serious 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $13260.00 · Current $13260.00

General-duty citation text

29 CFR 1910.244(a)(2)(i): Where there was a possibility of slippage of the cap, a block was not placed in between the cap and the load:    a) Manufacturing Area, Bay 5, Paint and Blast Area: A block was not placed between the cap of the jack and the 2" X 2" metal tubing used to expand the inside of the HI-STORM inner shell, on or about 10/25/19.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
  • — J (O) $13260
  • — C (S) $13260
  • — Z (S) $13260

More inspections at HOLTEC INTERNATIONAL

View HOLTEC INTERNATIONAL's full OSHA safety record →

More inspections in this industry (NAICS 332420)

More inspections in NJ

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343609053.