Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MCNABB TRUCKING, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MCNABB TRUCKING, INC. in 1384 BEECHCRAFT AVE, POCATELLO, ID 83201 (NAICS 311211). OSHA activity number 344378963.

Watch Mcnabb Trucking, INC. — free Get an email when a new federal OSHA severe-injury report for Mcnabb Trucking, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1384 BEECHCRAFT AVE
City
POCATELLO
State
ID
ZIP
83201
Mailing
PO DRAWER C, POCATELLO, ID 83202
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311211
Employees
13
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $5834.00 · Current $3000.00 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees.    a) On or about October 10, 2019 and at times prior thereto; Hyster Lift Truck Model H80XL, SN G005D03646R did not have a seatbelt installed; operators maneuver loads inside and outside the diesel mechanic shop.       Notes* Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $5834

1910.178 L02 II

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace.  a) On or about October 10, 2019 and at times prior thereto; operators of the Hyster Lift Truck Model H80XL, SN G005D03646R did not receive formal instruction.     Notes* Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L04 III

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:  a) On or about October 10, 2019 and at times prior thereto; operators of the Hyster Lift Truck Model H80XL, SN G005D03646R have not been evaluated.  Notes* Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L06

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  a) On or about October 10, 2019 and at times prior thereto; employer did not certify operators of the Lift Truck Model H80XL, SN G005D03646R; operators maneuver loads inside and outside the diesel mechanic shop.    Notes* Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344378963.