Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: LA ROSA COMPANY INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of LA ROSA COMPANY INC. in N144W5800 PIONEER ROAD, CEDARBURG, WI 53012 (NAICS 561730). OSHA activity number 344489570.

Watch LA Rosa Company INC. — free Get an email when a new federal OSHA severe-injury report for LA Rosa Company INC. is published. One employer, no account, unsubscribe in one click.
Site address
N144W5800 PIONEER ROAD
City
CEDARBURG
State
WI
ZIP
53012
Mailing
N144W5800 PIONEER ROAD, CEDARBURG, WI 53012
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
561730
Employees
73
Ownership type
A

5 citations on file for this inspection.

1910.23 B10

Serious Gravity 5 1 instance 59 exposed
Issued
Abate by
Penalty
Initial $5735.00 · Current $2000.00 Reduced
29 CFR 1910.23(b)(10): Ladders having defects were not marked and taken out of service until repaired:    (a)  On or about December 5, 2019, the employer did not remove from service, a Keller Fiberglass Extension Ladder (Model No. 5132) that was cracked and missing one foot.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $5735

1910.23 C03

Serious Gravity 5 1 instance 59 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.23(c)(3): The employer did not ensure that ladders were not loaded beyond the maximum intended load:  (a)  On or about December 5, 2019, employees had available for use, a Werner 12 foot fiberglass folding ladder which had information stickers that were not legible, subjecting the ladder to overloading. This exposed employees to a fall hazard .
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.215 A04

Serious Gravity 1 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $3441.00 · Current $1000.00 Reduced
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:      (a)  On or about December 5, 2019, the employer did not ensure that an 8" Westward Bench Grinder (Model No. 4TM71) had a tool rest, exposing employees to a struck by hazard.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $3441

1910.215 B09

Serious Gravity 1 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  (a)  On or about December 5, 2019, the employer did not ensure that an 8" Westward Bench Grinder (Model No. 4TM71) had a tongue guard, exposing employees to a struck by hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.303 B01

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $5735.00 · Current $2000.00 Reduced
29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees:    (a)  On or about December 5, 2019, the employer did not ensure employees were protected from live electrical equipment while working in the Wash Bay of the North Building.  In the southeast corner of the Wash Bay, there was a live electrical box missing a cover, exposing employees to a 120 volt electrical shock hazard.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $5735

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344489570.