OSHA Inspection: LARRY H MILLER NISSAN ARAPAHOE

Issued

2020-03-04 00:00:00

Abate by

2020-03-16 00:00:00

Penalty

Initial $9639.00 · Current $4810.00 Reduced

General-duty citation text

29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical.    a) On or about January 17, 2020, and at times prior, employees were exposed to hazardous chemicals in that a metal can with non-hexane brake cleaner, a gallon jug of windshield washer fluid and a spray bottle of exterior cleaner, located in the service area, were inadequately labeled.    b) On or about January 17, 2020, and at times prior, the employer, did not ensure employees in the detail department were protected from chemical hazards. Numerous secondary containers including, but not limited to high gloss dressing, body prep solvent, adhesive remover, xtra duty aerosol interior cleaner, special protect all and Colorado Wash N Wax, did not have product identifiers on them to alert of hazards associated with each chemical.       Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").

Issued

2020-03-04 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:  a)  On or about January 17, 2020, the employer did not maintain a clear distance of 3 feet in front of the circuit breaker panels in order to permit safe operation and maintenance of equipment.    Abatement Note: Abatement certification is not required for this item.