LOGAN, WV —
OSHA Inspection: AMANDA CRUM
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of AMANDA CRUM in 438 ENTERPRISE DR, LOGAN, WV 25601 (NAICS 811121). OSHA activity number 345182539.
Where did this inspection happen?
- Establishment
- AMANDA CRUM
- Site address
- 438 ENTERPRISE DR
- City
- LOGAN
- State
- WV
- ZIP
- 25601
- Mailing
- P.O. BOX 95, WILKINSON, WV 25653
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811121
- Employees
- 3
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 E01
- Issued
- Abate by
- Penalty
- Initial $1755.00 · Current $1755.00
0440
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace (a) Painting Area: On April 8, 2021 and times prior, an employee was required to wear a 3M half mask air purifying respirators while painting to protect from paint vapors, such as but not limit to, xylene, ethylbenzene, and n-butyl acetate. The employer has not ensured that the employee had a medical evaluation prior to the required respirator use.
Recent events (1)
- — Z (S) $1755
1910.134 C01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
0440
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: (a) Painting Area: On April 8, 2021 and times prior, the employer did not implement a written respiratory protection program for employees who are required to wear 3M half mask air purifying respirators while painting to protect from paint vapors such as but not limit to, xylene, ethylbenzene, and n-butyl acetate.
Recent events (1)
- — Z (S) $0
1910.134 F02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
0440
General-duty citation text
29 CFR 1910.134(f)(2): The employer did not ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter: (a) Painting Area: On April 8, 2021 and times prior, an employee was required to wear 3M half mask air purifying respirators while painting to protect from paint vapors, such as but not limit to, xylene, ethylbenzene, and n-butyl acetate. The employer has not ensured that the employees were fit tested prior to the required respirator use and then annually thereafter.
Recent events (1)
- — Z (S) $0
1910.1200 E01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) Body Shop: On April 8, 2021 and times prior to, employees conduct painting and auto body repair using High Teck and Pro Spray paint products and Evercoat Edge body filler. The employer has not developed a written hazard communication program for employees exposed to paint vapors such as but not limit to, xylene, ethylbenzene, and n-butyl acetate during painting and to styrene during auto body repair. ABATEMENT NOTE: A written program shall include a description of how the criteria for the following will be met: 1. Labeling and other forms of warnings; 2. Safety Data Sheets; 3. Employee information and training. Additionally, a list of hazardous chemicals known to be present in the workplace must be compiled. Methods used to inform employees of the hazards associated with non-routine tasks and the informing of contractors of workplace hazards, including a description of the labeling system used in the facility and the availability of safety data sheets must also be addressed. The written program must be made available upon request.
Recent events (1)
- — Z (O) $0
1910.1200 G08
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work shift to employees when they were in their work area(s): (a) Body Shop: On April 8, 2021 and times prior to, employees conduct painting and auto body repair using, but not limited to, High Teck and Pro Spray paint products and Evercoat Edge body filler. The employer did not maintain copies of the safety data sheets for the for the paint products and body filler. Abatement Note: Electronic access and other alternatives to maintaining paper copies of the safety data sheets are permitted as long as no barriers to immediate employee access in each workplace are created by such options.
Recent events (1)
- — Z (O) $0
1910.1200 H03
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(h)(3): The employee training did not include the requirements of 29 CFR 1910.1200(h)(3)(i) through (h)(3)(iv): (a) Body Shop: On April 8, 2021 and times prior to, employees conduct painting and auto body repair using High Teck and Pro Spray paint products and Evercoat Edge body filler. The employer has not provided employees training on the hazards associated with the paint vapors, such as but not limit to, xylene, ethylbenzene, and n-butyl acetate during painting and to styrene during auto body repair.
Recent events (1)
- — Z (O) $0
More inspections at AMANDA CRUM
LOGAN, WV—2022-02-03 00:00:00
AMANDA CRUM
View AMANDA CRUM's full OSHA safety record →
More inspections in this industry (NAICS 811121)
RIPON, WI—2026-07-15
SENECA FOODS CORPORATION
SUMMIT, IL—2026-07-08
BUDS BODY SHOP SUPPLY & PAINT
PUYALLUP, WA—2026-07-08
WA317991990 - GLASS WORKS PRO INC
SALEM, VA—2026-07-08
CERTIFIED COLLISION REPAIR
TUMWATER, WA—2026-07-07
WA317991940 - EMERGENCY VEHICLE SOLUTIONS LLC
More inspections in WV
CHARLESTON, WV—2026-07-15
ASTECH CORPORATION
PARKERSBURG, WV—2026-07-15
UNKNOWN
VIENNA, WV—2026-07-15
PHOENIX ASSOCIATES, INC.
BRIDGEPORT, WV—2026-07-14
MID ATLANTIC METALWORKS INC.
BRIDGEPORT, WV—2026-07-14
INFINITY ELECTRIC & SERVICE COMPANY, LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345182539.