CLAY, NY —
OSHA Inspection: GRIMALDI'S HEATING & SHEET METAL, INC.
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of GRIMALDI'S HEATING & SHEET METAL, INC. in WEGMAN'S PLAZA 3953 NY 31, CLAY, NY 13041 (NAICS 332322). OSHA activity number 345186175.
Where did this inspection happen?
- Establishment
- GRIMALDI'S HEATING & SHEET METAL, INC.
- Site address
- WEGMAN'S PLAZA 3953 NY 31
- City
- CLAY
- State
- NY
- ZIP
- 13041
- Mailing
- 808 3RD AVENUE, UTICA, NY 13501
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 2
- Ownership type
- A
Citations
2 citations on file for this inspection.
1926.451 E08
- Issued
- Penalty
- Initial $3218.00 · Current $3218.00
General-duty citation text
29 CFR 1926.451(e)(8): Direct access to or from another surface was used when the scaffold was more than 14 inches (36 cm) horizontally and/or 24 inches (61 cm) vertically from the other surface: a) Wegmans Plaza, 3953 NY 31, Clay, NY 13041: On or about 3/9/21, workers were using a SkyJack scissor lift to access a mezzanine surface, 10 feet from the lower level. The lift was oriented in such a way as to necessitate the worker to climb over the railing where the controller was located to access that surface.
Recent events (1)
- — Z (S) $3218
1926.501 B01
- Issued
- Penalty
- Initial $3218.00 · Current $3218.00
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. a) Wegmans Plaza, 3953 NY 31, Clay, NY 13041: On or about 3/9/21, workers were accessing a mezzanine surface, 10 feet from the lower level. The surface was 10 feet from the lower level and the edge was not guarded in any way.
Recent events (1)
- — Z (S) $3218
More inspections at GRIMALDI'S HEATING & SHEET METAL, INC.
UTICA, NY—2019-01-17 00:00:00
GRIMALDI'S HEATING & SHEET METAL, INC.
HENRIETTA, NY—2007-07-28 00:00:00
GRIMALDI'S HEATING & SHEET METAL, INC
View GRIMALDI'S HEATING & SHEET METAL, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
CASTLE ROCK, CO—2026-07-10
MASTER MAGNETICS, INC.
PITTSBURG, KS—2026-07-09
PROGRESSIVE PRODUCTS INC
NEW ROCHELLE, NY—2026-07-09
HEFTI HARBOR ELEC FAB & TOOLS
LAKEWOOD, WA—2026-07-08
WA317992020 - KRUEGER SHEET METAL CO
SOUTHAMPTON, MA—2026-07-07
LYMAN SHEET METAL CO., INC
More inspections in NY
POUGHKEEPSIE, NY—2026-07-13
MARCO BOARD HOUSE, INC.
CORTLANDT MANOR, NY—2026-07-13
LG BUILDERS INC.
CORTLANDT MANOR, NY—2026-07-13
RJW RENOVATIONS, LLC
HEMPSTEAD, NY—2026-07-13
NYSDOCCS NASSAU AREA OFFICE
NIAGARA FALLS, NY—2026-07-10
NTVI FEDERAL INC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345186175.