OSHA Inspection: JFM REMODELING COMPANY

Issued

2021-12-06 00:00:00

Abate by

2022-01-10 00:00:00

Penalty

Initial $329.00 · Current $329.00

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:   JFM Remodeling Company, failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:   Citation Number            Item Number                    Abatement Date  01                                         01                                          07/07/2021 01                                         02b                                        07/07/2021 01                                         03a                                        07/07/2021 01                                         03b                                        07/07/2021   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF THE CORRECTIVE ACTION WORKSHEET).

Issued

2021-06-09 00:00:00

Abate by

2021-06-15 00:00:00

Penalty

Initial $4096.00 · Current $4096.00

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a) On June 2, 2021, employees engaged in gutter installation work were not protected from fall hazards while working on the roof with the ground to eave heights of approximately 13 feet and 20 feet.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2021-06-09 00:00:00

Abate by

2021-07-13 00:00:00

Penalty

Initial $2926.00 · Current $2926.00

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee who might be exposed to fall hazards:   a) On or about June 2, 2021, employer did not provide training to each employee in order to recognize hazards associated with working at an elevation and to understand procedures to control or minimize those hazards.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2021-06-09 00:00:00

Abate by

2021-07-13 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards:   a) On or about June 2, 2021, employer did not provide training program to each employee in order to recognize hazards associated with working from ladders, and to understand procedures to control or minimize those hazards.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2021-06-09 00:00:00

Abate by

2021-06-15 00:00:00

Penalty

Initial $2926.00 · Current $2926.00

General-duty citation text

29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:   a) On June 2, 2021, an extension ladder used by employees to access and egress the roof did not have its side rails extended at least 3 feet above the roof eave.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2021-06-09 00:00:00

Abate by

2021-06-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.1053(b)(5)(i): Non-self-supporting ladders were not used at an angle such than the horizontal distance from the top support to the foot of the ladder way approximately one-quarter of the working length of the ladder (the distance along the ladder between the foot and the top support):   a) On June 2, 2021, employees were exposed to fall hazards while working from an extension ladder that was not set up at an angle such that the horizontal distance from the top support to the foot of the ladder was approximately one-quarter of the working length of the ladder.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).