Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

LOUVIERS, CO —

OSHA Inspection: FOM, LLC

Planned inspection · Safety discipline

At a glance

On , OSHA opened a planned safety inspection of FOM, LLC in 8230 N. CORA ST., LOUVIERS, CO 80131 (NAICS 332710). OSHA activity number 345637847.

Watch FOM, LLC — free Get an email when a new federal OSHA severe-injury report for FOM, LLC is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
FOM, LLC
Site address
8230 N. CORA ST.
City
LOUVIERS
State
CO
ZIP
80131
Mailing
PO BOX 129, LOUVIERS, CO 80131

What kind of inspection was it?

Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
332710
Employees
13
Ownership type
A

Citations

6 citations on file for this inspection.

1910.219 D01

Serious Gravity 1 1 instance 9 exposed
Issued
Abate by
Penalty
Initial $2486.00 · Current $1500.00 Reduced

General-duty citation text

29 CFR  1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  a) On or about November 10, 2021, and at times prior, the employer did not ensure that pulley on the belt and pulley apparatus in the cabinet of the vertical bandsaw was guarded. The pulley is located approximately one foot from the operator's feet. This condition exposed employees to hazards of contacting rotating pulleys and belts.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2486

1910.212 A01

Serious Gravity 1 1 instance 9 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:     a) On or about November 10, 2021, and at times prior, the employer did not ensure that the band saw blade in the cabinet of the vertical bandsaw was guarded. The blade is located approximately one foot from the operator's feet. This condition exposed employees to hazards of contacting rotating ingoing nip points and the exposed blade.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.242 B

Deleted Serious Gravity 1 5 instances 15 exposed
Issued
Penalty
Initial $2486.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:  a) On or about November 10, 2021, and at times prior, the employer did not ensure that air wand tool supplied with air pressure at the machines used for cleaning was reduced to less than 30 p.s.i.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2486

1910.151 C

Other-than-serious 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 2310

General-duty citation text

29 CFR  1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:  a) On or about November 10, 2021, and at times prior, the employer did not furnish flushing facilities in the immediate area of corrosive materials for emergency use.   The eyewash was located in the bathroom, past a potentially locked door and more than a 10 second walk from the battery operated forklift charging station.  Abatement Note: American National Standards Institute (ANSI) Z358.1-1998, Emergency Eyewash and Shower Equipment, which states, at section 7.4.4, that eyewash facilities are to be located to require no more than 10 seconds to reach but that where a strong acid or caustic is used, the unit should be immediately adjacent to the hazard.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.212 B

Deleted Other-than-serious 2 instances 30 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:  a) On or about November 10, 2021, and at times prior, the employer did not provide anchoring for the drill press machine to prevent walking or moving while in operation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.305 G01 IV A

Other-than-serious 1 instance 15 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  a) On or about November 10, 2021, and at times prior, flexible cords and/or cables were used as a substitute for the fixed wiring of a structure.  A fan, phone charger, and another extension cord for machinery computers were being  used to supply power by the Mori Seki CNC machine work table.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

More inspections at FOM, LLC

LOUVIERS, CO—2018-10-31 00:00:00

FOM, LLC

View FOM, LLC's full OSHA safety record →

More inspections in this industry (NAICS 332710)

More inspections in CO

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345637847.